help with my launching
#1
help with my launching
well I will be running in the nopi nationals this comming saturday and sunday. and last time I went to the track my 60ft's sucked or at least I think they do. I have a 88 crx with high cr ls/vtec in it. the car puts down some decient numbers for na anyways I cut 1.9's last time with m&h race masters 22" slicks my time was 13.4@100 I don't think that is horrible just the 60's. I set the 2step @7800 seems to go decient but 60's still suck. Is it my suspension? we just put shims in the rear. any other things you guys do that I don't know about. thanks anything would be helpfull I really have my heart set on 12.8's but ehh we will see.
here is a vid of the last run I got in. so far only 4 passes on the car 2 with slicks http://www.fourgasmmotorsports.com/88crx-13_49.wmv
here is a vid of the last run I got in. so far only 4 passes on the car 2 with slicks http://www.fourgasmmotorsports.com/88crx-13_49.wmv
#6
Re: help with my launching
and just what exactly is a ricer style open header. :1 you think I could lose that much with a flywheel. I was thinkin about bumpin the air pressure in the tire form 12 to say 16 or 17 whacha think.
#7
Re: help with my launching
open header you loose torque, kills the launch.
You need at add a 18-24" section to it to bring the torque back.
Flywheel = stored energy, helps the launch.
WHat rpm are you trapping at in 4th gear? Migth wanna goto a 20x8x14 slick.......then your light flywheel might be OK.
You need at add a 18-24" section to it to bring the torque back.
Flywheel = stored energy, helps the launch.
WHat rpm are you trapping at in 4th gear? Migth wanna goto a 20x8x14 slick.......then your light flywheel might be OK.
#8
Re: help with my launching
not positive on the rpm but I wanna say around 7k or so maybe just under it. should I try launching at 8500 ? help a little. I have to say though the car doesn't really bog at all. just rips up and goes. I think I will try the 18" pipe thing to see what that does.