help me decide(with picts)
#11
Re:help me decide(with picts)
If you want to lower under hood temps go with the first one. It isn't the best looking one but it sure has a big opening. I read that many people have put these on there car cuz they have an under hood IC. The reason is air can't go in if it can't get out. It would help alot. Abot the fans. My friend bought a High flow fan from oreillys for 60 bucks and it real thin and flows good. The FAL fans and others are just a waste of money. Plus they are black and you don't notice them as much. My Thoughts.
#14
Re:help me decide(with picts)
Originally Posted by d16z64life
Originally Posted by Travis
there all gay kiwi *****.
#15
Re:help me decide(with picts)
this ones not to bad
if had to choose between those, i would get this one --v
i think think this one is the same as the bottom
anyway i know yellowcrx6 has the 2nd/5th one. hes got a pic on hear somewhere of it on his crx. looks awsome
if had to choose between those, i would get this one --v
i think think this one is the same as the bottom
anyway i know yellowcrx6 has the 2nd/5th one. hes got a pic on hear somewhere of it on his crx. looks awsome
#17
Re:help me decide(with picts)
hmmmm try this... go to ace hardware... remove one of the bolts the holds the hood to the hinge... and tell the guy at the counter you want that exact same bolt but a little bit longer... not too long... about 1inch longer (buy 4 of them).... then buy a ---- load of washers...
now run the bolt through the hinge apply the buttload of washers evenly between the hinge and the hood... this will cause the hood to be a bit raised from stock configurations... allowing hot air to escape.... looks weird but works...
now run the bolt through the hinge apply the buttload of washers evenly between the hinge and the hood... this will cause the hood to be a bit raised from stock configurations... allowing hot air to escape.... looks weird but works...
#18
Re:help me decide(with picts)
Originally Posted by --------
hmmmm try this... go to ace hardware... remove one of the bolts the holds the hood to the hinge... and tell the guy at the counter you want that exact same bolt but a little bit longer... not too long... about 1inch longer (buy 4 of them).... then buy a ---- load of washers...
now run the bolt through the hinge apply the buttload of washers evenly between the hinge and the hood... this will cause the hood to be a bit raised from stock configurations... allowing hot air to escape.... looks weird but works...
now run the bolt through the hinge apply the buttload of washers evenly between the hinge and the hood... this will cause the hood to be a bit raised from stock configurations... allowing hot air to escape.... looks weird but works...
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#20
Re:help me decide(with picts)
Originally Posted by --------
hmmmm try this... go to ace hardware... remove one of the bolts the holds the hood to the hinge... and tell the guy at the counter you want that exact same bolt but a little bit longer... not too long... about 1inch longer (buy 4 of them).... then buy a ---- load of washers...
now run the bolt through the hinge apply the buttload of washers evenly between the hinge and the hood... this will cause the hood to be a bit raised from stock configurations... allowing hot air to escape.... looks weird but works...
now run the bolt through the hinge apply the buttload of washers evenly between the hinge and the hood... this will cause the hood to be a bit raised from stock configurations... allowing hot air to escape.... looks weird but works...