head wont come off?
have you ever had any troubles with getting the head off the block? My a6 head will not come off for the life of me. All the head bolts are out and the intake is off as well as the exaust manifold?
|
Re: head wont come off?
BFRM. Nah just work at it. And post in the right section, your dumb ass should know by now.
|
Re: head wont come off?
not sure what that means but.....man up and pull the bitch if everything is unhooked....the timing belt is unhooked right
|
Re: head wont come off?
i took the timing belt off the cam gear yea.
|
Re: head wont come off?
Distributor?
|
Re: head wont come off?
could i use anything to help get it off? Maybe a rubber mallet or some ----?
|
Re: head wont come off?
yea those two bolts are off as well as the the two on the other side
|
Re: head wont come off?
i seriously have pulled on it for the life of me. I can feel the block moving along with it.
|
Re: head wont come off?
drop it off your roof
|
Re: head wont come off?
is the intake completley off?
|
Re: head wont come off?
yea, all of the bolts are off it.
|
Re: head wont come off?
Originally Posted by 89shithatch
yea, all of the bolts are off it.
|
Re: head wont come off?
yea
|
Re: head wont come off?
i was kind of hoping someone would tell me i missed a bolt or something, damn.
|
Re: head wont come off?
simple if it doesnt pull away there is something holdin it on
The worst case is you can take a hammer to the water neck and give it a quick pop and there you go head off |
Re: head wont come off?
Have your little sister help you pull, Sally. :P
|
Re: head wont come off?
Originally Posted by jagojon3
Distributor?
huh? |
Re: head wont come off?
forget some head bolts?
|
Re: head wont come off?
nope, 10 total correct?
|
Re: head wont come off?
lift up a little on one side, then do it to the other side, and work its way back and forth. dont go hog wild on it, but kinda work it...you know.
then lift straight up. |
Re: head wont come off?
yea i know how to work them off, because i just took a y8 head off for the mini me. Are there any bolts on the a6 motor connecting the head that arent on the y8. And yea this thing wont budge, so you cannot really work it.
|
Re: head wont come off?
look over everything again
|
Re: head wont come off?
2x4 to the bottom of the water neck FTW.
|
Re: head wont come off?
thats what im thinking, i just dont wanna hit it hard then find out there was some mysterious bolt connecting the block to the head, and then my block is fucked. Is it possible for a head to be severly stuck to the block? The motor does have 185k?
|
Re: head wont come off?
MLS gaskets on later engines don't sticky-sticky like composite gasket on the A6.
Originally Posted by z1guy
2x4 to the bottom of the water neck FTW.
|
Re: head wont come off?
I had to beat the ---- outta my A6 with a 2lb mallet for it to pop
Just hit the outside area where the valve cover connects and hit inwards I probably took 20 min to get mine off but my engine was on a stand. Like JD said, the stock a6 gasket is composite bullshit, have fun scraping that off your block/head to |
Re: head wont come off?
Yep WOT's right. I had similar issues gettin my A6 head off. Its stuck to that gasket, rubber mallet is your friend. And for getting the old gasket off the block, i used the dremel with the steel brush bit, worked pretty well, then u get hit in the eye with little metal bristles once the brush nears the end of its life. Fun stuff.
|
Re: head wont come off?
im just going to put a piece of a two by four on the water next that connects to the radiator, then hit it with a hammer.
|
Re: head wont come off?
Originally Posted by 89shithatch
im just going to put a piece of a two by four on the water next that connects to the radiator, then hit it with a hammer.
|
Re: head wont come off?
water neck comment by me first
|
Re: head wont come off?
Swear at it and tell it if it doesn't come of it's getting replace with something american. It'll jump off the block. I say crowbar FTW under the dist.
|
Re: head wont come off?
im gonna tell it that if it does not come off i am going to turbo my gp automatic instead of it.
|
Re: head wont come off?
when me and a friend we younger and stupidier we pulled his 350 out of his nova by the head with all the bolts out. it was just hella stuck on there.
|
Re: head wont come off?
Bolt the IM back on and use it for leverage. If it doesnt come off then soak the engine bay with gasoline and then throw a match on it. That should heat the head up a bit and she'll come off easy as butter. ;)
|
Re: head wont come off?
Originally Posted by rsmith2786
Bolt the IM back on and use it for leverage. If it doesnt come off then soak the engine bay with gasoline and then throw a match on it. That should heat the head up a bit and she'll come off easy as butter. ;)
|
Re: head wont come off?
stick a pallet jack under it
|
Re: head wont come off?
Originally Posted by random-strike
stick a pallet jack under it
|
Re: head wont come off?
this is why tards arent suppose to work on cars
|
Re: head wont come off?
piss on it and put it back together
|
Re: head wont come off?
89shithatch voted dumbest noob of the year!
|
All times are GMT -5. The time now is 01:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands