Friend of mine's turbo setup (Canadian too!)
#1
Friend of mine's turbo setup (Canadian too!)
One of the local Canadian fellas I know with his turbo project. He's been building this on and off for the past year and it's going into his chrome illusion crx with jdm itr headlights and supra tails. Him and another buddy run a local tuning/motorswap shop and are our Hondata dealer.
His turbo puts my .60/.63 to shame!
- G.E Godzilla Sleeved block to 84.5 mm (2.0 liter)
- Crower I Beam rods
- Endyn/Wiseco Roller wave pistons
- G.E 84.5 mm head gasket
- Crower Stainless 1.0 mm+ intake , 0.5mm+ exhaust
- Fully Rebuilt by us (HIPE)
- Head Ported to our custom specs by Bruce @ HIPE, combustion chamber has been spot faced to 84 mm from 81mm
- Expected to see about 25 - 28 PSI
- will be tuned by me using Hondata and everything will be run via a palm pilot by me, Usaf @ Hipe
- 100-150 shot of nitrous will be used at assist for turbo spool up, will shut off automatically when the car hits 15 PSI.
- Equal length Stainless Steel manifold constructed from 304 L stainless
- HKS wastegate
- 3 inch DP and complete exhaust
- PWR IC Skyline GTR core
- G.E Sheet metal plenum manifold
- Hondata intake gasket
- 70 mm tb
- Turbo smart Megasonic BOV
- Apexi AVCR
- will be doing some custom mix of camshaft combination.
etc. etc. etc.
Stan
His turbo puts my .60/.63 to shame!
- G.E Godzilla Sleeved block to 84.5 mm (2.0 liter)
- Crower I Beam rods
- Endyn/Wiseco Roller wave pistons
- G.E 84.5 mm head gasket
- Crower Stainless 1.0 mm+ intake , 0.5mm+ exhaust
- Fully Rebuilt by us (HIPE)
- Head Ported to our custom specs by Bruce @ HIPE, combustion chamber has been spot faced to 84 mm from 81mm
- Expected to see about 25 - 28 PSI
- will be tuned by me using Hondata and everything will be run via a palm pilot by me, Usaf @ Hipe
- 100-150 shot of nitrous will be used at assist for turbo spool up, will shut off automatically when the car hits 15 PSI.
- Equal length Stainless Steel manifold constructed from 304 L stainless
- HKS wastegate
- 3 inch DP and complete exhaust
- PWR IC Skyline GTR core
- G.E Sheet metal plenum manifold
- Hondata intake gasket
- 70 mm tb
- Turbo smart Megasonic BOV
- Apexi AVCR
- will be doing some custom mix of camshaft combination.
etc. etc. etc.
Stan