flat black
 

How many cans do you think i would need to paint an accord flat black? do you think it would be better to just buy a gun, and a air compressor and a gallon of primer, i know a gallon of primer is like 30 buckcs, and that would be more than enough.

Re: flat black
 

primer fade's over a period of time. just buy a gallon of flat black paint

Re: flat black
 

between 4-5 cans per coat. I used one can for the right side of my car, one can for the left, one can for the hood one can for my bumber, and one can for my bumbers and trunk. You need atleast 2 coats, although I'd go with 3 or even four. sand the car to about 220 atleast before you paint it, and go with really ------- thin coats. otheriwse you'll get tiger stripes.

Re: flat black
 

i was thinking primer becausae i will probably paint this car in the next couple months, just a maaco job before i sell it,

with the primer i could at least sand it and prep it, then they can just seal it an paint.

not sure what im going to do at this point. I wish they made a dark blue primer

Re: flat black
 

Isnt primer pourus(sp?), meaning it absorbs water, causing rust? I would get primer/sealer, or just paint it with flat black paint instead of primer.

Re: flat black
 

The problem with painting a car in any 'cheap' was is that you have to sand it all off again to paint it the right way, espcially if you use spray paint.

Re: flat black
 

rustoleum

Re: flat black
 

It took me 7 cans of primer and 9 cans of flatblack to paint my 91 Civic HB. I didn't know my stepdad had a paint gun or I would have just went that way.

Re: flat black
 

WORD You can buy rustoleum in a gallon at home depot and its only like $45 bucks, would be a lot better than spray paint. whatever you use to paint your car make sure you spend the time and prep the car good if you dont it will look like ass no mater what paint you use.

Re: flat black
 

---- that,paint that bitch windows and all it gives it that stealth look O0