first time at track ever
hey guys,
I went to the track last night, first run was 15.1 at 93. best of the night was a 14.5 at 93 my r/t's sucked pretty much till the last run i got a .08 r/t ill post the time slips later have to give all the credit to you guys, first time out and im pretty happy with it, with some practice i think i can get down to a 14.2 my highest trap was a 95.9 with a 14.6 et. setup: 14b pushin 10psi afc hack w/ dsm 450's 2.5 dp to obx cat to 2.25 exhaust jrc 5" IC Kuhmo ecesta *sp 16 inch tires on kosei k-1 rims stock clutch stock flywheel it was gettin really hot at the end, have the stock radiator i did 3 runs, then i let it sit, did a run let it sit 5 10 mins, did a run. that about normal? thinkin about getting a bigger radiator. thanks again guys, comments opinions appreciated. |
Re: first time at track ever
here are the slips. 2 best runs.
r/t -------------.3690 60' ------------ 2.3669 et @ 594ft----- 8.9259 1/8 et----------9.4950 1/8 mph-------79.07 1/4 et----------14.5650 1/4 mph-------93.97 r/t -------------.0829 60' ------------ 2.3772 et @ 594ft----- 8.9972 1/8 et----------9.5711 1/8 mph-------78.40 1/4 et----------14.6161 1/4 mph-------95.92 comments and suggestions would be welcomed the best run felt like i spun the tires through first, but i got my best 60' and best overall time but lower mph. its hard to tell if the tires are spinning or they're like actually getting traction sometimes...i dunno weird lol thanks for all your guys help. |
Re: first time at track ever
not bad at all
your 60' needs practice but at least they are consistant. what engine is this on?? |
Re: first time at track ever
I'm no expert, but math wise if you cut your 60s down to 2.0 flat and the reaction time you nail, you'd dip 13s. Nice job though for the first time. Nothing to be ashamed of at all. I would say to get a bigger exhaust. 2 1/4 is tight for a turbo. Nice though, very well done. Congrats. ;) ;D
JP |
Re: first time at track ever
yeah what motor is this on????? very nice time's I think(don't know what motor the 10psi is on?)
|
Re: first time at track ever
oh sorry thanks for the replies, its on a stock d16y8
|
Re: first time at track ever
Not bad. You should be getting a bit more MPH (probably in the 96-99 range pretty easy)
But definetly not bad for your first time out. |
Re: first time at track ever
Originally Posted by samson
I'm no expert, but math wise if you cut your 60s down to 2.0 flat and the reaction time you nail, you'd dip 13s. Nice job though for the first time. Nothing to be ashamed of at all. I would say to get a bigger exhaust. 2 1/4 is tight for a turbo. Nice though, very well done. Congrats. ;) ;D
JP reaction time isnt figured into e/t |
Re: first time at track ever
u sure
|
Re: first time at track ever
u sure |
All times are GMT -5. The time now is 11:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands