HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   first gen integra LS w/ d16a1, what trans? 5spd manual. (https://www.homemadeturbo.com/general-discussion-6/first-gen-integra-ls-w-d16a1-what-trans-5spd-manual-81294/)

Smith-02 08-09-2007 10:22 PM

first gen integra LS w/ d16a1, what trans? 5spd manual.
 
trying to find out what trans, its a running car, shifts fine, but no underbody mounts left thanks to rust.

i can get this "engine/trans for $300" is it a deal? is this transmission any good?

Guy-Fast 08-09-2007 10:57 PM

Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
 
trans only bolts into 86-89 integra
84-87 crx with d16a1



basically if you dont have that chassis look elsewhere

Slo_crx1 08-10-2007 01:02 AM

Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
 
Or you can try the uber-ghetto way and fab up your own custom mounts to fit into an ED/EF chassis. Did that for a friend, solid mount out of plate steel...car rattled like a mofo and like to break ----. :P

Smith-02 08-10-2007 01:04 AM

Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
 
are the trans any good? ratios and ----

stillnoturbo 08-10-2007 07:38 AM

Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
 
That one kid on here bolt a Z6 into his 1G teg. Said that the tranny slid right on but just didn't use a couple bolts.

Guy-Fast 08-10-2007 12:32 PM

Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
 

Originally Posted by stillnoturbo
That one kid on here bolt a Z6 into his 1G teg. Said that the tranny slid right on but just didn't use a couple bolts.



That is true but again the mounts like up in the 1st gen teg/1st gen crx/3rd gen civic



You have to use all the 86-89 clutch/flywheel



They are built tough I believe bisi was using the 86-89 teg trans for sometime

Zeniceguycrx 08-10-2007 12:40 PM

Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
 
I use a 91 crx si tranny with the d16a1

Tom-Guy 08-10-2007 01:49 PM

Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
 
CG trans FTW!!

Give $100 for the drivetrain. If the car's rusted away the drivetrain needs gone through.

Smith-02 08-10-2007 02:54 PM

Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
 

Originally Posted by Joseph Davis
CG trans FTW!!

Give $100 for the drivetrain. If the car's rusted away the drivetrain needs gone through.

its 'solid' outside of no real rear mounts left, guess it sat on grass. the front half is clean though

Zeniceguycrx 08-10-2007 08:35 PM

Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
 
even for a complete engine to rebuild its wurth the 100

rexsk8er 08-10-2007 09:55 PM

Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
 
actually, theres quite a few drag cars running the cg transmission. some honda specific machine shop makes an adapter plate specifically for the h22 to put the a1 tranny on it.



the d seres trannys have stubby gears that make them strong

losesomethinbra 08-11-2007 06:01 PM

Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
 
Whats CG mean?

Anyways I'm running that same transmission and it seems to be ok.. Close ratio gears is nice but 5th gear is a little too low (and i'm too lazy to do the accord gear swap) The diff blew up but I hear they are weak in most all the D series transmissions anyways. I paid 65 for the transmission, not sure about the engines worth

Some people have put this combo into 88-91 civic/crx as a cheap zc alternative but for less work it'd be more at home in an older honda

Tom-Guy 08-12-2007 12:03 AM

Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
 
Older Honduhs weigh a fuckton less, but have lots less room in the nose.

Guy-Fast 08-12-2007 04:41 AM

Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
 

Originally Posted by Joseph Davis
Older Honduhs weigh a fuckton less, but have lots less room in the nose.



84-87 crx hf=super duper light



My buddies with full glass/metal just gutted interior with b18a1 w/ carbs w/driver was a little over 1700 pounds



mid 12's all motor b18a1 back in the late 90's. Super dope.


All times are GMT -5. The time now is 02:51 PM.


© 2024 MH Sub I, LLC dba Internet Brands