few pix of my LS block and such
 

http://www.newbieforces.com/files/p010.jpg
engine tag

http://www.newbieforces.com/files/p009.jpg
exhaust side, posts all jb welded up

http://www.newbieforces.com/files/p008.jpg
beautiful hone on my .020 overbore cylinders

http://www.newbieforces.com/files/p007.jpg
one of my V-8s on my engine stand, that bad boy will have to come off before I get the LS on there

http://www.newbieforces.com/files/p006.jpg
beautiful micropolished standard size crank (yellow main bearings)

http://www.newbieforces.com/files/p005.jpg
bottom of block with my old crank pully in a vice ready to be hack sawed in half keeping only the alternator belt slot.

http://www.newbieforces.com/files/p004.jpg
intake side

http://www.newbieforces.com/files/p003.jpg
this is where I drilled away the little brace piece to get this post as straight as possible to compensate for all the crooked ones I already had.

http://www.newbieforces.com/files/p002.jpg
top of block, you can see a few posts peaking out

http://www.newbieforces.com/files/p001.jpg
here's a pretty good shot of a post.

here's the thread where I posted the block:
https://www.homemadeturbo.com/forum/...threadid=18102

Re:few pix of my LS block and such
 

looking good. did the machine shop check if any of your sleeves were warped since u posted your block. what rods/pistons will u be using???

Re:few pix of my LS block and such
 

I don't know if the posts messed up the sleeves to cause the need for an overbore or if it was just engine wear, either way it doesn't matter, it's fixed now.

I'm going to be using wiseco pistons with eagle h-beam rods in a kit from www.raceeng.com on the phone they said it would be $759 for the .020 over kit, I'm guessing shipping is extra.

Re:few pix of my LS block and such
 

good work, nice pics..

you actually drink v8.. yuck.

Re:few pix of my LS block and such
 

overbore on stock sleeves scares me... :-\

Re:few pix of my LS block and such
 

hope they don't crack :P

Re:few pix of my LS block and such
 

the machine shop said it needed to be bored so I said ok. does it scare you because it's not normal or because it makes the sleeves want to break?

my step mom bought 2 cases of v8. I like it when it's really cold and you can't taste it too much, or with lots of lime juice and salt.

Re:few pix of my LS block and such
 

I like mine with Tequila

Re:few pix of my LS block and such
 

V8's good ----, basically i pour out 1/3 of the V8 and refill it with vodka.. and then take off in the car to work.

Re:few pix of my LS block and such
 

Kyle, you are very abnormal in your engine building, but I like it. Even if you bust one of those sleeves because you bored .20 over/screwed up the posts/ect... I still look up to you. ;)