few pix of my LS block and such
http://www.newbieforces.com/files/p010.jpg
engine tag http://www.newbieforces.com/files/p009.jpg exhaust side, posts all jb welded up http://www.newbieforces.com/files/p008.jpg beautiful hone on my .020 overbore cylinders http://www.newbieforces.com/files/p007.jpg one of my V-8s on my engine stand, that bad boy will have to come off before I get the LS on there http://www.newbieforces.com/files/p006.jpg beautiful micropolished standard size crank (yellow main bearings) http://www.newbieforces.com/files/p005.jpg bottom of block with my old crank pully in a vice ready to be hack sawed in half keeping only the alternator belt slot. http://www.newbieforces.com/files/p004.jpg intake side http://www.newbieforces.com/files/p003.jpg this is where I drilled away the little brace piece to get this post as straight as possible to compensate for all the crooked ones I already had. http://www.newbieforces.com/files/p002.jpg top of block, you can see a few posts peaking out http://www.newbieforces.com/files/p001.jpg here's a pretty good shot of a post. here's the thread where I posted the block: https://www.homemadeturbo.com/forum/...threadid=18102 |
Re:few pix of my LS block and such
looking good. did the machine shop check if any of your sleeves were warped since u posted your block. what rods/pistons will u be using???
|
Re:few pix of my LS block and such
I don't know if the posts messed up the sleeves to cause the need for an overbore or if it was just engine wear, either way it doesn't matter, it's fixed now.
I'm going to be using wiseco pistons with eagle h-beam rods in a kit from www.raceeng.com on the phone they said it would be $759 for the .020 over kit, I'm guessing shipping is extra. |
Re:few pix of my LS block and such
good work, nice pics..
you actually drink v8.. yuck. |
Re:few pix of my LS block and such
overbore on stock sleeves scares me... :-\
|
Re:few pix of my LS block and such
hope they don't crack :P
|
Re:few pix of my LS block and such
the machine shop said it needed to be bored so I said ok. does it scare you because it's not normal or because it makes the sleeves want to break?
my step mom bought 2 cases of v8. I like it when it's really cold and you can't taste it too much, or with lots of lime juice and salt. |
Re:few pix of my LS block and such
Originally Posted by kyle
my step mom bought 2 cases of v8. I like it when it's really cold and you can't taste it too much, or with lots of lime juice and salt.
|
Re:few pix of my LS block and such
V8's good ----, basically i pour out 1/3 of the V8 and refill it with vodka.. and then take off in the car to work.
|
Re:few pix of my LS block and such
Kyle, you are very abnormal in your engine building, but I like it. Even if you bust one of those sleeves because you bored .20 over/screwed up the posts/ect... I still look up to you. ;)
|
Re:few pix of my LS block and such
u need to spray paint DIRTY LS/VTEC on the back of ur car when ur done
|
Re:few pix of my LS block and such
If i were you i wouldnt cut up the crank pulley or use an aftermarket one. The stock ones were designed as a harmonic dampener to make the bottom end live longer.
|
Re:few pix of my LS block and such
Originally Posted by accordepicenter
If i were you i wouldnt cut up the crank pulley or use an aftermarket one. The stock ones were designed as a harmonic dampener to make the bottom end live longer.
I agree. I don't know the exact reasoning(or if that's true), but I wouldn't go ------- with it, but then again, you did go and drill holes in the block in unknown positions so what the ----, do it up man. ;) __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:few pix of my LS block and such
stealth is going to use an aluminum pulley on his d-series hotrex beater crx, we look up to each other so I'm going to do like he does, even if he doesn't do what I do.
|
Re:few pix of my LS block and such
Originally Posted by GimpyCivic
V8's good ----, basically i pour out 1/3 of the V8 and refill it with vodka.. and then take off in the car to work.
v8s are great for bloody marries |
Re:few pix of my LS block and such
Originally Posted by quadnie
v8s are great for bloody marries
Bloody marries are for old retired women. Real men drink beer. |
Re:few pix of my LS block and such
When I saw the pic with the engine stand, I was like "WTF, there's no damn V8 on there, Kyle is a cracksmoker!" Then I saw the stupid can of tomato juice. Fucker! ;D
|
Re:few pix of my LS block and such
i dont under stand how posting the block actually make the sleeves take more boost, wouldnt it be the same as a block guard which goes around the whole sleeve? i know that the expansion rate and all that balh blah blah but wouldnt that happen with the posts also?
|
Re:few pix of my LS block and such
the posts are made of the same ---- the block is made of so they expand and contract the same, at least that's the idea.
|
Re:few pix of my LS block and such
Whats with the Crutches in the background????
Anyways, Good stuff, looks like sumthing Ravage and I are working on |
Re:few pix of my LS block and such
that's in my garage, the crutches are just over in a corner in case we need them.
|
Re:few pix of my LS block and such
Originally Posted by kyle
that's in my garage, the crutches are just over in a corner in case we need them.
|
Re:few pix of my LS block and such
lol, u people pick the funniest ---- out of pictures... i never noticed the crutches
|
Re:few pix of my LS block and such
I think they're the most in focus thing other than the engine itself, that's why people noticed.
you can also see my welder in the v-8 shot, I got that fucker working good, it had the wrong size tension wheel in. |
Re:few pix of my LS block and such
nice work gangsta.
|
Re:few pix of my LS block and such
Originally Posted by AbaZ
overbore on stock sleeves scares me... :-\
|
All times are GMT -5. The time now is 05:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands