i removed the face gauge housing, when i put it back on the turn signal indicator and the lights outside do not work.
i put everything back on as it should be but i dont know what's wrong with it i need my turn signals back, need some help with this problem.

thanks

 

did you shake anything around while doing so?

 

sounds like you might have knocked off a cluster ground wire.

 

^^^^^^^^ that or you might have accidently blown a fuse under the dash..that happened to me in the rex.

 

well the only thing i did was take the face housing off.
just to see how it work then i just put it back on.
thats all i did.

 

Bang on the top of the dash. It will work! Seriously, I had the same problem and it was the left light socket not getting a good connection. I gave it a wrap and its worked fine ever since.

 

I would check your turn signal fluid.....LMAO, my wife is still lookin for it.

 

 

i found what was wrong with it.
before i took the face off i was working on my radio, it seems that if the hazards connection are not plug in correctly the turn signals wont work, so i adjusted the plug a now it works.

thanks for all the advice.

 

wow, what an -------