face gauge
i removed the face gauge housing, when i put it back on the turn signal indicator and the lights outside do not work.
i put everything back on as it should be but i dont know what's wrong with it i need my turn signals back, need some help with this problem. thanks |
Re:face gauge
did you shake anything around while doing so?
|
Re:face gauge
sounds like you might have knocked off a cluster ground wire.
|
Re:face gauge
^^^^^^^^ that or you might have accidently blown a fuse under the dash..that happened to me in the rex.
|
Re:face gauge
well the only thing i did was take the face housing off.
just to see how it work then i just put it back on. thats all i did. |
Re:face gauge
Bang on the top of the dash. It will work! ;D Seriously, I had the same problem and it was the left light socket not getting a good connection. I gave it a wrap and its worked fine ever since.
|
Re:face gauge
Originally Posted by B16Kidd
^^^^^^^^ that or you might have accidently blown a fuse under the dash..that happened to me in the rex.
Originally Posted by quadnie
sounds like you might have knocked off a cluster ground wire.
|
Re:face gauge
Originally Posted by sccaeg
I would check your turn signal fluid.....LMAO, my wife is still lookin for it.
|
Re:face gauge
i found what was wrong with it.
before i took the face off i was working on my radio, it seems that if the hazards connection are not plug in correctly the turn signals wont work, so i adjusted the plug a now it works. thanks for all the advice. |
Re:face gauge
Originally Posted by sccaeg
I would check your turn signal fluid.....LMAO, my wife is still lookin for it.
|
All times are GMT -5. The time now is 04:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands