exhaust for integra
 

i been tring to think about the company that makes pre-bent exhaust for the 90-93 integra. i drink to much and cant remember. :S:y can any one you help?

Re: exhaust for integra
 

Skunk2 is the route I go when it comes to prebent exhaust.

Re: exhaust for integra
 

sure if you want to pay ou the ass.. there are a couple places like kteller and vsr exhaust

Re: exhaust for integra
 

racing solutions. theyre a sponsor..

Re: exhaust for integra
 

"I am sofa king..."

Re: exhaust for integra
 

i have the hks catback and love it get compliments all the time.

Re: exhaust for integra
 

Yuo definately get what you pay for. And a great tone.

Re: exhaust for integra
 

we todd did!

Re: exhaust for integra
 

Fixed it for you, fag.

Why not just get a mandrel bend kit and a muffler you like, then get a spic shop to weld it up for you? Cheaper and just as good, if not better.

Re: exhaust for integra
 

;)

Re: exhaust for integra
 

That sounds like that other ricer boy mentality of "If its not good then why do they make them"

If your theory is true then does that mean the Edlebrock turbo kit is better cause it cost more? IMO saying the quality of exhaust is directly related to its price is like saying my car is faster cause the numbers go higher on the spedo.

Re: exhaust for integra
 

CHECK yo SELF you dont know TWADDLE about flow. When your mexi-melt muffler falls off down the 1320 BIIIIIIIITCH.

Re: exhaust for integra
 

Who the ---- let you loose on the internet? An exhaust is a pipe welded to a damn can filled with baffles and/or steel wool/etc. A weld isn't going to magically disintegrate because it wasn't performed in Japan by some fruity company. HKS does $5 worth of work on $20 worth of materials then sells it for 10 times more at $250. ---- that. A pipe is a pipe, a weld is a weld, and my "mexi-melt" (wtf?) muffler probably flows better than 90% of the ---- you can get from Japan, and mine cost $65 including the price of the generic fart can off of ebay. Plus, it doesn't sound one bit ricey, even with the silencer OUT.

Re: exhaust for integra
 

YOU GOT A FLOW BENCH TO PROVE THAT? HOW MUCH R&D DID YOU PUT INTO THIS BUTT PLUG EXHAUST? :6

Re: exhaust for integra
 

I know its Friday but can we get a banhammer in here?

Re: exhaust for integra
 

he didnt ask how can i order the parts to assemble my own homebrew exaust.HKS wasnt mentioned and thats what i have so i gave my 2 cents.Can u delete ---- talking POST?wouldnt want to rack up say 150?

Re: exhaust for integra
 

Holy ----, I just looked up the prices on the HKS cat back for Integras. $586? Jesus christ, you must be gay because you took it up the ass in stride.

I am opposed to any store-bought exhaust systems. When something is so simple and cheap to just have done COMPLETELY custom made, why would you want to go any other route? For maybe $150 total, I could get a high quality high-flow muffler, 3" mandrel bends, and have a local vato weld up a complete turbo-back exhaust. And that's a quarter of what you paid for your pathetic cat-back. And as far as R&D? Your HK$ pipe bolts up to your stock B-pipe, ------- idiot. So you have a 1.25" pipe from the header back? Retard.

Re: exhaust for integra
 

God damb everyone of you are freakin idiots, so you say "that the mex built will flow better"no R&D to prove it" HKS is solid no doubt for the cost, then you say the 1.5 header to a 2.5 comment, 100 ------- %invalid for cum guzzeling faggot. If you have a header from a reputable company they have a 2.5in outlet hense the SKUNK2 2.5in exhaust. Get a test pipe, add a resonator if you have a city ordinace for a db level, and enjoy the FACTUAL gains for a true R&D proven compant built exhaust.

SKUNK2 IS THE BETTER BET PAL :4

Re: exhaust for integra
 

3 " all the way man. straight pipe all the way through :y

Vent your gate , sir.

Re: exhaust for integra
 

+1 skunk2 will also make you a 3in if you requst it from THEM and pay the extra $125 for the extra material. YES ITS ALSO BEEN R&D, same example that they made for the FIT T that the FIT turbo nogs

Re: exhaust for integra
 

I have never been particularly impressed by anything Skunk2 has come out with. Your commentary proves how little you know, widebody.

14 revisions to the Skank2 throttle body... survey says: they still bind and catch, and occaisionally the throttle shaft snaps in two.

Skank2 cams... suck, and make no power... with the exception of the new Pro series which make great power when they don't snap in half due to a poorly designed ramp angle.

There's not much dyno proven mumbo jumbo that a DIY exhaust with mandrel bends, or crush bent out of bigger pipe, can't equal or better. Have you looked at a Honda exhaust?? Three 90 bends, maybe a 45, and some straight pipe. There is no other way to route the pipe, and it's real hard to ---- up unless you are a real clown.

Re: exhaust for integra
 

hks bolted right up.not like other exhaust that ive put on where you always seem to have to bend a hanger to keep it from hitting something.Not to mention the fact that the angle it comes out at will be hard for the ''vato'' to copy.maybe come close at best.55mm pipe BTW = 2.165 dump the waste out the front......

Re: exhaust for integra
 

backpeddle some more, so now you were talking about the fitment. this is hmt bitch, we make it fit

Re: exhaust for integra
 

who the ---- gives a ---- about the "angle it comes out"? ricer faggot

Re: exhaust for integra
 

R+D means nothing when you're not scavenging every last hp. Widebody, you'd be better off learning to fabricate rather than reaching for your wallet everytime you need something....

Re: exhaust for integra
 

He doesn't reach for his wallet, reactone. There's an active thread about him having a chinese turbo on his car.

Re: exhaust for integra
 

These Greddy/Skunk2 fags need to go back to Honda-Tech.

Re: exhaust for integra
 

God damn right.

HKS' cat-back "for NA applications" is 60mm piping, not 55. And as far as paying skunk2 $125 to go from 2.xx to 3" piping for a catback? I could have my whole exhaust fabbed in 3", and have enough leftover for a blowjob from your mom.

Re: exhaust for integra
 

Not only is my HKS catback(including the b pipe.lol dumbass!) DESIGNED for NA applications ,but its 55mm piping is also designed for turbo applications . maybe if you really went to the web site you would see that.as for skunk2(skunkworkz)---- them.greddy fuckoff. fitment issues take time TIME IS MONEY!

Re: exhaust for integra
 

This thread needs to be locked immediately. Theres homosexual talk going on.

Re: exhaust for integra
 

Homophobes Kill Subject.....HKS.....lol

Re: exhaust for integra
 

who the ---- let the retards loose? i cant believe i just read what these idiots had to say. custom three inch mandrel bent is no ------- differnt then your hks built ---- with the retarded bend at the end. and it doesnt matter wtf hks says or skunk2. god damn you two fags are retarded(otp teg and widebodyfag). seriously ban hammer these fags

Re: exhaust for integra
 

O0

OTP = Fail.

Re: exhaust for integra
 

been saying the exact same thing for months now.... :y

Re: exhaust for integra
 

Fixed it for you

Re: exhaust for integra
 

all of u are stupid......nor can u use a simple search engine like google..if all of my parts dont=a turbo system at least they =money,unlike all of your bitchass ghetto setups.All my ---- is brand new in the box fag.yea yea like i built my whole car for like $642.42 jerkoffs.

Re: exhaust for integra
 

*point at honda-tech forum*
STFU!

Re: exhaust for integra
 

otp fag, please leave HMT and never come back.

Thanks.

Re: exhaust for integra
 

It's got a Holset H1C on it now with a 12cm exhaust housing. I got the ching chone meow off a friend for cheaper than what cheap is. It was a trial, lesson learned, put a O.E. turbo on and called it a day. Thats old new, not like you ever tried something ching chong.........

Re: exhaust for integra
 

Not on my cars, I haven't. Let others try them at their expense? Sure.