EF big brakes a different way
#1
Guest
Posts: n/a
EF big brakes a different way
I got these RX7 4 piston aluminum calipers off of Ebay for $23... Cleaned em up , ground off the ""mazda" painted them red to make em look Brembo Baller.
The spindls are from a 90 integra the pic was with stock rotors..
But I also found that a redrilled Sentra SER SPec V will fit the spindle with no clearence issues...
not sure if I am gonna go with the integra rotors or the spec V rotors (3 times the cost)
Next up I am going to make an adapter from some 1/4" plate using the plasma..
these are going on an 89 Si I am building for the GRM $2008 Challenge
Between the 2 integra rotors , Spindles and RX7 calipers I have less than $60 in the entire front setup...
JM
00 TDI
89 Si Z6 , T3 , Starion , vitara's...just need to put it all together
86 Fiero GT Northstar 32V v8 5spd POS
66 Corvair turbo
79 Cadillac
56 Isetta
The spindls are from a 90 integra the pic was with stock rotors..
But I also found that a redrilled Sentra SER SPec V will fit the spindle with no clearence issues...
not sure if I am gonna go with the integra rotors or the spec V rotors (3 times the cost)
Next up I am going to make an adapter from some 1/4" plate using the plasma..
these are going on an 89 Si I am building for the GRM $2008 Challenge
Between the 2 integra rotors , Spindles and RX7 calipers I have less than $60 in the entire front setup...
JM
00 TDI
89 Si Z6 , T3 , Starion , vitara's...just need to put it all together
86 Fiero GT Northstar 32V v8 5spd POS
66 Corvair turbo
79 Cadillac
56 Isetta
#10
Re: EF big brakes a different way
here is an easier way and be safe while doing this..
all you need are any bigger factory HONDA/ACURA caliper and pick what rotors you want to use.. it will save you machineing time and headaches
http://fastbrakes.com/shop/product_i...roducts_id=102
all you need are any bigger factory HONDA/ACURA caliper and pick what rotors you want to use.. it will save you machineing time and headaches
http://fastbrakes.com/shop/product_i...roducts_id=102