General Discussion Off-Topic Discussion and Enlightenment

E-test update

Thread Tools
 
Search this Thread
 
Old 01-27-2005, 08:46 PM
  #11  
3.0 BAR
Thread Starter
 
spoon fed's Avatar
 
Join Date: Feb 2004
Posts: 3,368
Default Re:ONTARIO HMTers PLEASE HELP *~ETEST RESULTS UPDATE*~

thanks Steve-o

check out the post for the ontario meet
spoon fed is offline  
Old 01-27-2005, 11:10 PM
  #12  
0.5 BAR
 
CDN Y-49 CRX's Avatar
 
Join Date: Nov 2004
Posts: 60
Default Re:ONTARIO HMTers PLEASE HELP *~ETEST RESULTS UPDATE*~

HC and CO that high usually means dirty oil and dirty ( or oversized) injectors. Also the "NO" levels are prob due to plugged cat, cuz now the same exhaust is passing through a more resricted opening so it gets hotter. Hotter it runs, higher the no.

Did you change plugs lately? That would also be a cheap but benificial gain.
CDN Y-49 CRX is offline  
Old 01-28-2005, 05:42 AM
  #13  
1.0 BAR
 
falkhen's Avatar
 
Join Date: Feb 2004
Posts: 209
Default Re:ONTARIO HMTers PLEASE HELP *~ETEST RESULTS UPDATE*~

looks as if the O2 sensor is at fualt you can run ok.. but you 02 get lazy and run you rich in to the poor house with repairs

my d15b2. running realy highcompresion (11.4:1)
failed 3 times till i figure out it was the o2 sensor

after replacing that it ran so clean it wasn't funy

i replaced an injector o-ring

replaced o2 sensor.

yes you o2 can go bad and still no CODE!!!
honda recomends you replace your 02 sensor every year.
i can't remember the CBT# i saw it last year though


falkhen

falkhen is offline  
Old 01-28-2005, 09:10 AM
  #14  
3.0 BAR
Thread Starter
 
spoon fed's Avatar
 
Join Date: Feb 2004
Posts: 3,368
Default Re:ONTARIO HMTers PLEASE HELP *~ETEST RESULTS UPDATE*~

THANKS GUYS!!
I should do a tune up on it, I took it in to se just how bad it was. I definately need a cat.
spoon fed is offline  
Old 01-28-2005, 09:48 AM
  #15  
0.5 BAR
 
D16Y7-T's Avatar
 
Join Date: Jan 2005
Posts: 192
Default Re:ONTARIO HMTers PLEASE HELP *~ETEST RESULTS UPDATE*~

WOW thats a lot to fail by man you might want to see why you are failing that bad instead of getting a fake but if you really really need one I can hook you up if you want. I am in Kingston.
D16Y7-T is offline  
Old 01-28-2005, 10:04 AM
  #16  
3.0 BAR
 
bumblezc's Avatar
 
Join Date: Sep 2003
Posts: 3,751
Default Re:ONTARIO HMTers PLEASE HELP *~ETEST RESULTS UPDATE*~

Ouch, I might know someone in Kitchener. Haven't seen him in a while but I'll Check. That's the nice part about where I live. I don't have to e-test my cars yet. I has moved into my area and it probably wont!
bumblezc is offline  
Old 01-28-2005, 10:07 AM
  #17  
3.0 BAR
 
88crxSi's Avatar
 
Join Date: Feb 2003
Posts: 9,089
Default Re:ONTARIO HMTers PLEASE HELP *~ETEST RESULTS UPDATE*~

what engine? if its a NON STOCK engine, its classified as a Hot-Rod and gets more lienient on emissions.
88crxSi is offline  
Old 01-28-2005, 10:45 AM
  #18  
3.0 BAR
Thread Starter
 
spoon fed's Avatar
 
Join Date: Feb 2004
Posts: 3,368
Default Re:ONTARIO HMTers PLEASE HELP *~ETEST RESULTS UPDATE*~

Its a SOHCZC

IF YOU COULD GET ME AN ETEST I WOULD DO YOU A HUGE FAVOUR

I know it needs a huge tune up and a cat, It sounds like it mis-fires a bit sometimes too
spoon fed is offline  
Old 01-28-2005, 10:52 AM
  #19  
3.0 BAR
 
bumblezc's Avatar
 
Join Date: Sep 2003
Posts: 3,751
Default Re:ONTARIO HMTers PLEASE HELP *~ETEST RESULTS UPDATE*~

Hey spoon when do you need to do this by. If you come to pick up that intercooler, We can put a timing light on it, tune it up, and I might be able to talk my buddy into letting you use his CAT, but then again it's easier to scam one from the junk yard!

I don't think you can get hotrod specs. because it's still a SOHC, if yo went to DOHC you would qualify for sure. Slap on a turbo and they might be easier on you!
bumblezc is offline  
Old 01-28-2005, 10:57 AM
  #20  
3.0 BAR
Thread Starter
 
spoon fed's Avatar
 
Join Date: Feb 2004
Posts: 3,368
Default Re:ONTARIO HMTers PLEASE HELP *~ETEST RESULTS UPDATE*~

josh go on msn
spoon fed is offline  


Quick Reply: E-test update



All times are GMT -5. The time now is 09:20 AM.