Dynoed my stock z6 4 door today@10psi now with pics!!!
put the turbo kit on again a couple days ago so i figured i'd go hit up the dyno today.
current setup: stock d16z6 t3/t04e .57 trim ssac manifold 450s tial 38mm .6 bar spring 25x5x3 fmic 1g dsm bov 2.5" charge piping 3" exhaust base map untuned running 16 degrees of timing i think i could have squeezed out another ten hp but i didnt want to push it. http://home.comcast.net/~goinpostal5/dyno3.jpg |
Re: Dynoed my stock z6 4 door today@10psi
ahh, Kickass D-Rock. i guess thats a 50 hp gain over your built setup huh? 185 last time right? maybe we will hit the rollers again and lean it out a bit and make that 10 hp :-)
|
Re: Dynoed my stock z6 4 door today@10psi
it wants to make more, you can see it...hp still climbing like mad, and a fairly flat tq curve.
its too bad theres weak stock pistons in there, you could really run it up. |
Re: Dynoed my stock z6 4 door today@10psi
Nice smooth power curve! I'd say go for the extra 10 though!
|
Re: Dynoed my stock z6 4 door today@10psi
Nice numbers!
Any pics of the setup? You should also post some street videos. ;D GJ! |
Re: Dynoed my stock z6 4 door today@10psi
topend must kickass
|
Re: Dynoed my stock z6 4 door today@10psi
nice power! good turbo :)
|
Re: Dynoed my stock z6 4 door today@10psi
thanks for all the compliments guys, i'll try to post up some pics tomorrow. i dont have any current pics at the moment.
no vids yet, just got the car running 2 days ago |
Re: Dynoed my stock z6 4 door today@10psi
damn good numbers man!
|
Re: Dynoed my stock z6 4 door today@10psi
1/4mile times?damn its untuned?isnt that dangerous?i want a big turbo now!
|
Re: Dynoed my stock z6 4 door today@10psi
damn you! i gotta get mine fixed, i think i blew my seals, and need new bearngs.. ehh owell...
|
Re: Dynoed my stock z6 4 door today@10psi
congrats man, that thing must fly.
This is a good example of a turbo sized well for a motor, nice flat torque curve and climbing hp up til redline. Good job >:D |
Re: Dynoed my stock z6 4 door today@10psi
good for you for getting 235+/- on stock z6.
|
Re: Dynoed my stock z6 4 door today@10psi
wow, great numbers for a stock d
|
Re: Dynoed my stock z6 4 door today@10psi
not too bad, good work
|
Re: Dynoed my stock z6 4 door today@10psi
Originally Posted by AbaZ
wow, great numbers for a stock d
the numbers make me want to put in the .8 bar spring and see what happens :) lol, oh well, i think i'll play it safe since i want this motor to last me a little while. maybe at the track i'll up the boost a little...if the motor lasts until next season that is... but yeah, as for 1/4 times i havent had my car running during track season yet... :( so i guess we'll wait and see next year. |
Re: Dynoed my stock z6 4 door today@10psi
which ssac mani... the "classic" or his new ramhorn rip?
|
Re: Dynoed my stock z6 4 door today@10psi
Damnn that's some good ass number..
looks like when vtec hits..it leans out to 13 A/F. |
Re: Dynoed my stock z6 4 door today@10psi
Originally Posted by AbaZ
which ssac mani... the "classic" or his new ramhorn rip?
|
Re: Dynoed my stock z6 4 door today@10psi
Originally Posted by AbaZ
wow, great numbers for a stock d
That's insane on a stock D. Good job!!! When does it spool/hit full boost (10psi)? Push another 10hp? That sure would be close to breaking points on that motor right? 230whp is pushing it. Isn't it? JP |
Re: Dynoed my stock z6 4 door today@10psi
hits full boost around vtec :-D
|
Re: Dynoed my stock z6 4 door today@10psi
Originally Posted by CaVy9722
Originally Posted by AbaZ
wow, great numbers for a stock d
NEUMAN |
Re: Dynoed my stock z6 4 door today@10psi
damn 236 with a ssac mani thats crazy
|
Re: Dynoed my stock z6 4 door today@10psi
Originally Posted by youdontknowmeee
damn 236 with a ssac mani thats crazy
|
Re: Dynoed my stock z6 4 door today@10psi
Nice #'s Congrats man ;D
|
Re: Dynoed my stock z6 4 door today@10psi
congrats dude!!! cant wait to do mines...still waiting for the bends and adapter plate.... mad propz homie! :8
|
Re: Dynoed my stock z6 4 door today@10psi
Originally Posted by CaVy9722
450s
base map untuned running 16 degrees of timing |
Re: Dynoed my stock z6 4 door today@10psi
i think what he is refering to is a "base map"
|
Re: Dynoed my stock z6 4 door today@10psi
impressive. i want to see what my b15b7 is doing on 10psi. but i get my ls tomorrow :(
|
Re: Dynoed my stock z6 4 door today@10psi
i love seeing monster ds ;D it makes me smile
|
Re: Dynoed my stock z6 4 door today@10psi
Originally Posted by samson
That's insane on a stock D. Good job!!! When does it spool/hit full boost (10psi)? Push another 10hp? That sure would be close to breaking points on that motor right? 230whp is pushing it. Isn't it? JP |
Re: Dynoed my stock z6 4 door today@10psi
Originally Posted by TurbodEG
impressive. i want to see what my b15b7 is doing on 10psi. but i get my ls tomorrow :(
See what your d15b7 does on 20 psi and record it >:D |
Re: Dynoed my stock z6 4 door today@10psi
Originally Posted by djfob
Originally Posted by samson
That's insane on a stock D. Good job!!! When does it spool/hit full boost (10psi)? Push another 10hp? That sure would be close to breaking points on that motor right? 230whp is pushing it. Isn't it? JP He was running 13 psi, and it was raping serious ass. then we turned it down to 10 psi. didint want it going lean considering the map sensor only reads to 11.5 psi. |
Re: Dynoed my stock z6 4 door today@10psi
Originally Posted by djfob
topend must kickass
|
Re: Dynoed my stock z6 4 door today@10psi
Soooooo is the 236whp at 13psi? 11.5psi? or 10psi? I want a hybrid now. LOL. We NEED pics and vids ASAP!!!!!!
JP |
Re: Dynoed my stock z6 4 door today@10psi
if you read the post, it says 10 psi, we originally where at 13 psi before we went to the dyno, but we didint want it going lean so we turned the boost down to 10. he might put the 13 psi spring back in and see if he can hit 260
|
Re: Dynoed my stock z6 4 door today@10psi
Originally Posted by Random Hero
if you read the post, it says 10 psi, we originally where at 13 psi before we went to the dyno, but we didint want it going lean so we turned the boost down to 10. he might put the 13 psi spring back in and see if he can hit 260
Sorry. This is on stock MAP sensor? Hmmm, it only reads to 11.3 or something though right? Wouldn't it just lean right out? JP |
Re: Dynoed my stock z6 4 door today@10psi
.... you didn't read any of the posts.. i said thats why we took it down to 10 psi. going to change to a 2 bar map sensor instead of the stock 1.75. then it will be ok. Thats if he decides he wants to push it :-D
:8 |
Re: Dynoed my stock z6 4 door today@10psi
here are some pictures for your enjoyment :)
http://home.comcast.net/~goinpostal5/100_1360.JPG http://home.comcast.net/~goinpostal5/100_1361.JPG http://home.comcast.net/~goinpostal5/100_1362.JPG http://home.comcast.net/~goinpostal5/100_1365.JPG ultra mad tyte jdm muffler tip |
Re: Dynoed my stock z6 4 door today@10psi now with pics!!!
oh snaps 3 inche exhaust.... and its not even hooked up.. lol :-P maybe we should do that today.
|
All times are GMT -5. The time now is 02:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands