do ya think this would work?
 

Solder up some wire leads to a 10k potentiometer using the last 2 terminals so that when the dial is turned as far as it can go counterclockwise you have 0 ohms resistance. do you think you mod the air/fuel with this?

???Intake Air Temperature Sensor: Cut wire 8 and solder the potentiometer in series. It doesn't matter which side of the potentiometer goes to which wire. You should start tuning the car with the knob turned fully counterclockwise (the ecu will see the real air temperature). By turning the knob clockwise the ecu will think that the air is cooler and will add fuel to accommodate the denser air. Do not try and tune without monitoring the O2 sensor with a voltmeter. Tune until you get .88-.92 at wide open throttle. You will only be able to adjust full throttle A/F ratio with this mod. It won't do anything for the lower rpms. Don't adjust this unless you've done some mods to require more fuel.