yoshi

Solder up some wire leads to a 10k potentiometer using the last 2 terminals so that when the dial is turned as far as it can go counterclockwise you have 0 ohms resistance. do you think you mod the air/fuel with this?

Intake Air Temperature Sensor: Cut wire 8 and solder the potentiometer in series. It doesn't matter which side of the potentiometer goes to which wire. You should start tuning the car with the **** turned fully counterclockwise (the ecu will see the real air temperature). By turning the **** clockwise the ecu will think that the air is cooler and will add fuel to accommodate the denser air. Do not try and tune without monitoring the O2 sensor with a voltmeter. Tune until you get .88-.92 at wide open throttle. You will only be able to adjust full throttle A/F ratio with this mod. It won't do anything for the lower rpms. Don't adjust this unless you've done some mods to require more fuel.