Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
The other thread is to honda-tech, lets see them check valves negrowz :6
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
1 Attachment(s)
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
We know Complex will win
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
my engine is in there
http://img223.imageshack.us/img223/6545/dscf0085at9.jpg then this http://img223.imageshack.us/img223/3443/dscf0112br9.jpg |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Originally Posted by jagojon3
[img width=400 height=300]http://i132.photobucket.com/albums/q26/jagojag/VC.jpg[/img]
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
New rule: car must have lasted 10k plus.
iss CCFAB madness disqualified from here too? I patched the manifold together twice myself, and jon thow some birdshit on it also. |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Originally Posted by ichbinsobose
iss CCFAB madness disqualified from here too? I patched the manifold together twice myself, and jon thow some birdshit on it also.
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
I know there's 100 nastier setups that my 2nd EF turbo hatch but here's some pics of it anyways. I put at least 10k boosted miles on it, sold it in Feb and it's still running strong. Talked to the new owner a few days ago and he's lovin it.
Notice the whiteyflux downpipe, jbwelded to hell hot pipe and melted overflow tank hose. Absoloutly no dump FTW. http://67.33.14.41/redhatch/11.jpg Can't really tell but for breather filters, I used paper towels and zip-ties http://67.33.14.41/redhatch/12.jpg Retarded looking BOV flange tube, tons of red silicone goodness. The red rag keeps ---- from rattling. http://67.33.14.41/redhatch/10.jpg pimpest ass seat cover http://67.33.14.41/redhatch/7.jpg battery relocation...and a sweater. http://67.33.14.41/redhatch/6.jpg ghettofied exhaust job, I used cut up silicon hose attached with mechanics wire to keep it from banging on the chassis http://67.33.14.41/redhatch/2.jpg |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
i like this contest better... wish i could play
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Behold the crapulence that is my daily driver.
The big picture http://memimage.cardomain.net/member...5_125_full.jpg Sweet interior shot http://memimage.cardomain.net/member...5_116_full.jpg Totally JDM weld to cast manifold complete with J/T Chrysler T3 turbo. http://memimage.cardomain.net/member...5_121_full.jpg Note vent to atmosphere PCV valve and exhaust pipe charge pipes, also using a peice of a Cunfire intake pipe to accomadate the IAT sensor http://memimage.cardomain.net/member...5_122_full.jpg Chrysler bypass valve for BOV http://memimage.cardomain.net/member...5_123_full.jpg TSC store 3" in 3" out tractor mulffler.. attached to 3" cruch bent madness straight pipe exhaust http://memimage.cardomain.net/member...5_118_full.jpg Gangster 2 BAR GM MAP sensor wired to hacked up Toyota stock one http://memimage.cardomain.net/member...5_117_full.jpg Closeup of weld to cast DP http://memimage.cardomain.net/member...5_100_full.jpg When I got the car... auto w/278 K http://memimage.cardomain.net/member...5_108_full.jpg Last week https://i104.photobucket.com/albums/...s/P1020795.jpg |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
all tits.
Dont be ashamed of the fluxcore, throw those pictures up like a nog throwin' bolos. |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
http://img.photobucket.com/albums/v3...a/IMG_0016.jpg
http://img.photobucket.com/albums/v3...a/IMG_0017.jpg http://img.photobucket.com/albums/v3...a/IMG_0019.jpg http://img.photobucket.com/albums/v3...a/IMG_0025.jpg http://img.photobucket.com/albums/v3...a/IMG_0026.jpg http://img.photobucket.com/albums/v3...a/IMG_0027.jpg http://img.photobucket.com/albums/v3...h_MVI_0024.jpg and the front page screenshot: http://img.photobucket.com/albums/v3...pturboyoda.jpg |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Jon wins
Hands and PVC pipe down |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
I may be able to take this one.
32K mile damaged engine, $200. The damage is from a roll-over that totalled the car... the exhaust cam gear was trashed, the exhaust cam broken, last cam cap split in half, and the intake cam was chipped. http://www.redpepperracing.com/galle...8004-2/aah.jpg Notice the crack in one of the bosses the driver's mount bolts to? One of the bolts had entirely stripped the threads out of the block and was missing, the other two bolts were bent with threaded bosses stripped and cracked. $25 at the welding shop and helicoils FTW! http://www.redpepperracing.com/galle...8019-2/aae.jpg http://www.redpepperracing.com/galle...8039-3/aam.jpg I was too broke back then to afford a cherry picker, so the shortblock was wrestled in by hand: http://www.redpepperracing.com/galle...8045-3/aao.jpg I used one of these to do the heavy lifting: http://www.redpepperracing.com/galle...8046-2/aaq.jpg Enter free .50/.48 turbo and $56 rebuild kit: http://www.redpepperracing.com/galle...8049-2/aap.jpg I bent the oil feed line out of 1/4" stainless for a sum total of $8: http://www.redpepperracing.com/galle...8052-2/aar.jpg http://www.redpepperracing.com/galle...8055-2/aas.jpg This is a really good view of the PCV charge pipe, gangster lean of the radiator, and my use of zipties: http://www.redpepperracing.com/galle...6751-3/abi.jpg The original MAPhack board... this was before freeware boost code, and AFCs were gay ways to destroy an engine. $15 at Radio Shack to build a voltage regulator circuit and feed the MAP sensor 3.1 volts. I used Ghettodyne + $50 Batronix chip burner to get the job done with this sweet little jobber: http://www.redpepperracing.com/galle...8497-2/aaf.jpg The only set of non-steelies I have ever owned in my life. When the tires went bald I threw the rims away with the tires: http://www.redpepperracing.com/galle...6789-2/abh.jpg The joys of bad turbo seals, oily rear bumpers, and friends who love you: http://www.redpepperracing.com/galle...8917-3/aar.jpg Glory days: http://www.redpepperracing.com/galle...1/00121190.jpg And, for those of you who still doubt that I am the ----------ing king, here is a picture of me humping a downpipe: http://www.redpepperracing.com/galle...-3/aar_001.jpg (Imagine that's your gf, mom, or sister) Seriously, most of the rig jobs here have nothing on my CRX. Mine ran correctly for under a hundred bucks, ran for 15K of brutal flogging, and had some one-off trick ---- I did myself. The MAPhack was my invention. I did PVC before any of the rest of you. No one else does hard steel oil line. No one else has a picture of them humping a downpipe. 8) |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
1 Attachment(s)
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Originally Posted by Joseph Davis
No one else does hard steel oil line.
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
10 Attachment(s)
Attachment 26492
no mutha ------ filter Attachment 26493 300z sidemount Attachment 26494 Attachment 26495 Attachment 26496 Attachment 26497 hoodless Attachment 26498 shitty muff too Attachment 26499 Attachment 26500 audi bypass Attachment 26501 |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Everyone look at Steve's "Project Slut" or whatever and check out the Tek9 DSM BOV, haha. Gangsta :y
JP |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Originally Posted by AstroVannin
You wish... I had hard steel oil line till my giant donkey dick T fitting broke off in the block for like the 10th ------- time.
How do you like the Tractor Supply Company muffler? It's a straight-thru design, right? |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
zip ties, cheep beer, assorted nuts and bolts, electrical tape, old led 40/60 rosin core solider, window screen (air filter) or a 316l filler rod
all possible prizes for the most nig, nog. |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
rawr, when will your ghettofied build be posted? ;)
I might end up going PCV pipe+front mount after all... we shall see |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Originally Posted by SinisterCRX
rawr, when will your ghettofied build be posted? ;)
I might end up going PCV pipe+front mount after all... we shall see |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
12 Attachment(s)
looks like you guys paid too much
Attachment 26467 Attachment 26468 Attachment 26469 Attachment 26470 180hp @7psi Attachment 26471 Attachment 26472 Attachment 26473 Attachment 26474 http://img.photobucket.com/albums/v9...turbo/pipe.jpg Attachment 26475 Attachment 26476 Attachment 26477 Attachment 26478 ? |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
---- looks just like my old car
when I first put it together, and yes, I had a plug on the 02 hole http://www.we-todd-did-racing.com/fi...OWMIGUJJNM.JPG http://www.we-todd-did-racing.com/fi...MNMJKUEYQR.JPG gangster http://www.we-todd-did-racing.com/fi...Y1TBVRXV2P.JPG http://www.we-todd-did-racing.com/fi...0D2OGD1HUA.JPG http://www.we-todd-did-racing.com/fi...AC7O36VPI8.JPG http://www.we-todd-did-racing.com/fi...QAGQBRT11Q.JPG homemade boost controller http://www.we-todd-did-racing.com/fi...9TJ4GNKDJD.JPG http://www.we-todd-did-racing.com/fi...URUWAXNYLI.JPG http://www.we-todd-did-racing.com/fi...88TWHKNDWX.JPG the day I sold it. :'( http://www.we-todd-did-racing.com/fi...5A37AC2PYB.JPG I cant find the picture of the JB welded block. O0 |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
That's some solid work, Frank.
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
hands down one of the best HMT threads.
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Word. I am not even going to bother posting mine...maybe I should though. It's a living miracle as those who have ridden in it in '07 will vouch.
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Originally Posted by Joseph Davis
I braced the line to the block so it wouldn't do that.
How do you like the Tractor Supply Company muffler? It's a straight-thru design, right? |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
1 Attachment(s)
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Cherry Bomb ??? Whatever man, thats like made for a car, tractor action is teh win. Il have to post a vid so you can hear it, Im totally surprised at the sound.
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Project slut was one of the best. Gotta love JB weld holding on couplers :)
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Originally Posted by ichbinsobose
Word. I am not even going to bother posting mine...maybe I should though. It's a living miracle as those who have ridden in it in '07 will vouch.
Originally Posted by Snafubmx234
Project slut was one of the best. Gotta love JB weld holding on couplers :)
Originally Posted by junkyard racer
---- looks just like my old car
when I first put it together, and yes, I had a plug on the 02 hole I cant find the picture of the JB welded block. O0 |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
i know i've got it in me.
dont worry, im heading back to my roots. Ive got alot of ---- going on right now as to where my happy ass will be calling home in the next 6 months...who knows what will happen. i've still got "300hp for under $1000" to build before I leave Okinawa. ;) Buddy of mine who rips on hondas has yet to nail 300hp on his powerfc tuned SR20, toami cams, head gasket, and a something or other non-OEM turbo. non-sense. I wanna do it on 100% junkyard bullshit, im not spending more than $1000 on my ---- 300hp. :) Thats including a new 1.8 motor. |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
i believe its tomei. and he must not have any clue on how to tune then. from all the reading i've done on the sr's is that the redtop with cams and a bigger turbo can push 475whp. i guess they're built like a brick -----house
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
This thread ------ rocks. In for more.
|
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
wish i would have taken pics of some setups i've done. hella ghetto when you are hacking up the neighbors garden hose at 11pm for your oil drain line so you can take a test drive around the block. ended up loseing the hose and 3 qts of oil by time i got back, lol.
now these are the set-ups HMT was based on, now everybody wants SS oil lines, metal charge pipes and a real welded bead besides a good ol fat JB bead :S. |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
there's some killer low buck setups in here. O0rigged
also JD with hair looks like atlee from gone in 60 seconds |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Originally Posted by MAJORAHOLE
i believe its tomei. and he must not have any clue on how to tune then. from all the reading i've done on the sr's is that the redtop with cams and a bigger turbo can push 475whp. i guess they're built like a brick -----house
my buddys sr20 is getting tuned thsi weekend...probably as I type. He's hoping for 500hp on stock bottom end (with arp hardware) ;) Motec tuned. the other guy who cant break the 300hp mark, his problem is he's maxing out his injectors. Hes at like 9something dc at ful throttle. Its tuned by the apexi dealer (only dealer on island) ...its a solid tune. I wanna build a HMT 300hp set-up so bad it drives me nuts. |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
this is the first hmt turbo set up i ever did and it pulled pretty good. it was a d15/z6 mini-me (10.?) compression with fmu foooooo. ran for a year. tring to find pics of the hmt hood scoop and water intercooler sprayer via washer fluid ::)
http://img66.imageshack.us/img66/358...051642aia4.jpg you like the support rods on the down pipe ? yes that is 3 different oil lines conjoined to make 1 :y :8 O0 http://img184.imageshack.us/img184/1...051643avu4.jpg http://img204.imageshack.us/img204/5...051642cgx3.jpg http://img204.imageshack.us/img204/9...0051643uh7.jpg jb anyone ? |
Re: Dirtiest, Cheepest, JB/Birdshit welded, gangster HMT set-up contest.
Originally Posted by JDMFantasy2K
also JD with hair looks like atlee from gone in 60 seconds
|
All times are GMT -5. The time now is 07:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands