General Discussion Off-Topic Discussion and Enlightenment

Debuting my G2 Integra *dyno sheet & vids*

Old 05-09-2005, 02:05 PM
  #1  
0.5 BAR
Thread Starter
 
DAVe's Avatar
 
Join Date: Oct 2004
Posts: 197
Default Debuting my G2 Integra *dyno sheet & vids*

So... i haven't officially announced it on the forum, but my car is finally up & running!!
I've had it now for a little over a month. It's running slightly rich & making 265 whp w/ 170 ft/lbs @ 10 psi. Once I upgrade my ignition, i'm planning on raising the boost & running a little more of an aggressive tune.

Here's the sheet:


Here's some recent footage:

GS-R turbo VS Neon SRT-4
Run #1: He gets the jump on me with 1 long honk followed by 2 short honks. I catch his *** at the top of 5th.
Run #2: This time it's a fair launch...... check the vid to see what happens

GS-R turbo VS EF Hatch with LS swap
This hatch is very quick... he made me race him from a dead stop..... since my car has the traction of a snowboard, he whips my *** off the line. I eventually catch him and pass him. He made me race 4 times. He told me that it was "just a stock engine"... He didn't let me look under the hood either.

GS-R turbo VS 350z Supercharged
I have to say I was very impressed with my car against the 350z. I was planning on him outright destroying me from start to finish. I knew I was going to lose, but i didn't make it to easy for him. I felt he only crept by me instead of blowing my doors off! I talked to him afterwards. He's running a vortec supercharger at 11.5 psi making 420 HP! He was definitely impressed with my car.

..... more vids & updates to come!
DAVe is offline  
Old 05-09-2005, 02:15 PM
  #2  
3.0 BAR
 
AgentMurdoc's Avatar
 
Join Date: Dec 2002
Posts: 9,203
Default Re: Debuting my G2 Integra *dyno sheet & vids*

like a fireball dude!

nice vids... my fav was the srt4, cause his *** got pwn3d the second time around. ------ beeeeeeeeeep beep beep... sheit, good work
AgentMurdoc is offline  
Old 05-09-2005, 02:15 PM
  #3  
3.0 BAR
 
Donald125's Avatar
 
Join Date: May 2003
Posts: 6,279
Default Re: Debuting my G2 Integra *dyno sheet & vids*

did u meant debugging? :P

what`s your setup, why are you getting only 265/169 @ 10 psi.
Donald125 is offline  
Old 05-09-2005, 02:27 PM
  #4  
0.5 BAR
Thread Starter
 
DAVe's Avatar
 
Join Date: Oct 2004
Posts: 197
Default Re: Debuting my G2 Integra *dyno sheet & vids*

Originally Posted by Donald125
did u meant debugging? :P

what`s your setup, why are you getting only 265/169 @ 10 psi.
like i said.... i have it tuned rich. I'm not to worried about getting bigger #'s until i upgrade my ignition. Plus, i had an exhaust leak when it was dynoed. It runs much better now with the leak fixed. It is getting dynoed again on Saturday.

setup:

Fully Built B17A1 block. (not re-sleeved)
balanced crank
Crower Billet Rods
Wiseco oversized Pistons 9.0:1 Compression
Race Engineering Block Guard

Cometic High Boost Head Gasket

Almost Fully Built GS-R Head
Crower dual valve springs
Crower Titanium Retainers
Ferrea Titanium Valves
Stock GS-R Cams
AEM Adjustable Cam Gears
RC 370 cc fuel injectors

Turbonetics T3/T4 Turbo

Engine Management:
P61 ECU
Apex-i V-AFC
Apex-i AVC-R
Vortec FMU
Blox missing link

Apex-i Turbo Timer
Walbro 255 L/hr Fuel Pump

Intake:
Custom Intercooler piping (matches diameter of stock throttle body)
Greddy Type S Blow-off Valve
Spearco Front Mount Intercooler

Exhaust:
OBX Tubular Exhaust Manifold
Turbonetics Deltagate Wastegate
Custom 2.5" downpipe
Custom 2.5" straight Pipe
Greddy 66mm Street Exhaust
DAVe is offline  
Old 05-09-2005, 02:52 PM
  #5  
0.0 BAR
 
rota92's Avatar
 
Join Date: Jul 2003
Posts: 47
Default Re: Debuting my G2 Integra *dyno sheet & vids*

Engine Management:
P61 ECU
Apex-i V-AFC
Apex-i AVC-R
Vortec FMU
Blox missing link



Umm....Get rid of the FMU like before your car was running?
rota92 is offline  
Old 05-09-2005, 02:53 PM
  #6  
3.0 BAR
 
Donald125's Avatar
 
Join Date: May 2003
Posts: 6,279
Default Re: Debuting my G2 Integra *dyno sheet & vids*

missing link and vafc don`t mix
Donald125 is offline  
Old 05-09-2005, 02:55 PM
  #7  
0.5 BAR
Thread Starter
 
DAVe's Avatar
 
Join Date: Oct 2004
Posts: 197
Default Re: Debuting my G2 Integra *dyno sheet & vids*

everything seems to be working just fine.

i'm sorry you guys don't like my car.
DAVe is offline  
Old 05-09-2005, 03:00 PM
  #8  
3.0 BAR
 
Donald125's Avatar
 
Join Date: May 2003
Posts: 6,279
Default Re: Debuting my G2 Integra *dyno sheet & vids*

LOL noone hates your car it`s just that there`s problem with it but thumps up if it`s wokring fine for you
Donald125 is offline  
Old 05-09-2005, 03:11 PM
  #9  
0.0 BAR
 
R-MAK's Avatar
 
Join Date: Feb 2003
Posts: 0
Default Re: Debuting my G2 Integra *dyno sheet & vids*

nice vids, atleast you rape on your turbo gsr unlike a certain other member
R-MAK is offline  
Old 05-09-2005, 03:14 PM
  #10  
3.0 BAR
 
Chris Harris's Avatar
 
Join Date: Jul 2003
Posts: 6,449
Default Re: Debuting my G2 Integra *dyno sheet & vids*

Doesnt seem too much like a HOME MADE TURBO setup to me but whatever floats your boat. You did however pick the best chasis known to man (IMHO).
Chris Harris is offline  

Thread Tools
Search this Thread
Quick Reply: Debuting my G2 Integra *dyno sheet & vids*



All times are GMT -5. The time now is 09:33 PM.