HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   Clutch slippage, losing clutch fluid (https://www.homemadeturbo.com/general-discussion-6/clutch-slippage-losing-clutch-fluid-60253/)

ghettoturbo 04-26-2006 11:44 AM

Re: Clutch slippage, losing clutch fluid
 
ok...let me rephrase: add on "unless the fluid is leaking onto the disc"

Sinner 04-27-2006 12:14 AM

Re: Clutch slippage, losing clutch fluid
 
slight thread jack, but on the same topic

my clutch sometimes engages way to early when letting off the pedal.. sometimes it doesnt. Any ideas?

Ravage70 04-27-2006 12:18 AM

Re: Clutch slippage, losing clutch fluid
 

Originally Posted by Sinner
slight thread jack, but on the same topic

my clutch sometimes engages way to early when letting off the pedal.. sometimes it doesnt. Any ideas?

air in the line
welcome to my world

Sinner 04-27-2006 12:20 AM

Re: Clutch slippage, losing clutch fluid
 

Originally Posted by Ravage70
air in the line
welcome to my world

i must have a leak somewhere, because I already bled the clutch twice trying to fix the problem. It doesnt seem like i'm loosing fluid ethier.

Nick

EG-prince 04-27-2006 08:43 PM

Re: Clutch slippage, losing clutch fluid
 
So I dug around a little and I found my leak-- its coming from what the haynes manual calls the release cylinder. Its the little cylinder on the front of the tranny-- theres a rod from the tranny that goes into it and the bleeder is kind of attached to it. I went to autozone but they don't carry the part-- any one know of a good place to get one? Napa was closed but maybe they do, or should I just try to find a used one? And how much $$$ will it cost me for a new one?

Donald125 04-27-2006 09:19 PM

Re: Clutch slippage, losing clutch fluid
 
that`s the slave cylinder, should have been the first place to check for leaks.

EG-prince 04-27-2006 10:57 PM

Re: Clutch slippage, losing clutch fluid
 
I'm a moron. Thanks guys.

Donald125 04-27-2006 10:58 PM

Re: Clutch slippage, losing clutch fluid
 
You want the slave cylinder only, releasing bearing goes INSIDE of the bellhousing


All times are GMT -5. The time now is 11:17 PM.


© 2024 MH Sub I, LLC dba Internet Brands