close race between rx7&turbo honda....NOT!!!!
 

This is a car called pica from PR last year at the Pan American's, ATTCO raceway in new jersey. I see some rotary vids on here and this is one BAD ASS rotary. I want to see this rx7 and Brent Rau's eclips go at it!!
http://img531.imageshack.us/my.php?i...cord713bq0.flv

Re: close race between rx7&turbo honda....NOT!!!!
 

holy ----
didnt expect that, ------- sweet >:D

Re: close race between rx7&turbo honda....NOT!!!!
 

holy ---- that was fast

Re: close race between rx7&turbo honda....NOT!!!!
 

i was expecting it to be a close race. o well. thats what you get. doubters.

Re: close race between rx7&turbo honda....NOT!!!!
 

holy ----, that is ------- fast

Re: close race between rx7&turbo honda....NOT!!!!
 

ya thats pica!.. but that record was broken by nayeli.. 7.09
http://72.167.101.30/quvU9uBr/videos/08-07-06o/001.wmv

Re: close race between rx7&turbo honda....NOT!!!!
 

Holy ---- it sounds like ---- :3

Re: close race between rx7&turbo honda....NOT!!!!
 

Id drive an rx7 right now if the mpg wasnt so bad

Re: close race between rx7&turbo honda....NOT!!!!
 

holy ---- that red car, sentra?, peg legged halfway down the track >:D

Re: close race between rx7&turbo honda....NOT!!!!
 

Holy ----. The wheelie bar should have been a clue but I was still in awe.

Re: close race between rx7&turbo honda....NOT!!!!
 

once i saw him have to back up to the line i knew itd be close ::)

Re: close race between rx7&turbo honda....NOT!!!!
 

If I remember correctly, the turbo honda ran a pretty good 1/4. i think it was a 11 seconds but it looked like it was on a sunday drive compared to Pica. Now here is the car i want to see him run.This is Brent Rau's mitsubishi 4G63!
http://www.youtube.com/watch?v=NFyWYDEL9CY

Re: close race between rx7&turbo honda....NOT!!!!
 

I seriously thought the honda broke down. lol. Kinda thought the 7 would win though as I'm just use to seeing crazy wankels and the wheelie bars gave it away.

Re: close race between rx7&turbo honda....NOT!!!!
 

Damn, he almost say hello to Mr. TheWall! That was ------- fast :l

Re: close race between rx7&turbo honda....NOT!!!!
 

i wanna know what was done to that first gen in the OP

Re: close race between rx7&turbo honda....NOT!!!!
 

holy perfect launch 1-2 shift

Re: close race between rx7&turbo honda....NOT!!!!
 

probably j-bridge, 3mm apex seals, dry sump with electric water pump, t2 tranny bolted to a ford 8 inch with a massive ass turbo.

Re: close race between rx7&turbo honda....NOT!!!!
 

I would probably consider a Prif. port.

Re: close race between rx7&turbo honda....NOT!!!!
 

That car is fast but its not a street car!! You can't compare the two!! but :o

Re: close race between rx7&turbo honda....NOT!!!!
 

:8 :8 :8 no mamez :8 :8 :8

Re: close race between rx7&turbo honda....NOT!!!!
 

---- id be in the 10s if i could get off the line like that :6

Re: close race between rx7&turbo honda....NOT!!!!
 

He never let out of it, that car is stupid fast!! He is running over 40 LBS of boost and making over 1,000 HP out of a 2.0
Mark

Re: close race between rx7&turbo honda....NOT!!!!
 

As soon as I saw that I though here we go, some sub 10 car, wasent expecting a 7 sec. car.. :o

Re: close race between rx7&turbo honda....NOT!!!!
 

That bitch, is fast.

Re: close race between rx7&turbo honda....NOT!!!!
 

I guess I'll add another.
Holy ---- that was fast

Re: close race between rx7&turbo honda....NOT!!!!
 

tight as a nuns ---- on a frosty morning

Re: close race between rx7&turbo honda....NOT!!!!
 

Another view of that same run
http://www.youtube.com/watch?v=xys1p...eature=related

Re: close race between rx7&turbo honda....NOT!!!!
 

those 13bs are well built and have way more things than most people think... they are done the extreme... they run on alcohol and there is no prif port, the motors are all boost and they go like hell!! they also hve the chassis and suspension setup to the best it could be... the use dana 60s, ford 9 inch, dana 44, chevy 10 bolts... depending what power you make is what rear they use....they are 3/4 chassis cars... they arent cheap but they fun as hell

Re: close race between rx7&turbo honda....NOT!!!!
 

d60 in a 1st gen ---- yes. :o

Re: close race between rx7&turbo honda....NOT!!!!
 

Im not arguing with you, but there is no reason anyone should be using a chevy 10 bolt, if it didnt come in a car. There are no less than 3 ford 9inch rears within 50 yards of my house.

Re: close race between rx7&turbo honda....NOT!!!!
 

i wonder what a 1.1 60' feels like. :6

Re: close race between rx7&turbo honda....NOT!!!!
 

99% of us will never know. I ------- love that car though. Paint it flat black and ill ---- it in the gas tank.

Re: close race between rx7&turbo honda....NOT!!!!
 

Probably like being in space shuttle Challenger, but not the takeoff part, the blowing up part.

Re: close race between rx7&turbo honda....NOT!!!!
 

Have you never been to one of those Pneumatic powered rail car tracks they used to have at the larger g0-cart facilities? They look like a Jr. dragster rail car, but are infact on rails. You sit in it, the light turns green and you hang on. :y

Re: close race between rx7&turbo honda....NOT!!!!
 

Def not a street port....lol. My vote goes to bridge or pport.

Jesus christ wheelie bars.

My friend mo had a 1st gen. 12a and carbed. It wouldn't start one day and he just said ---- it and punched the windsheild (cracked it bad), let it sit for a few months and then sold it for $200. Now he drives one of those new base model sentras. :3 If only we knew what he had......

---- the gas mileage. Rotaries are bad ass. What i've learned this past month about rotaries, the good outweighs the bad. They're dirt cheap. Really. They sit in junkyards because nobody want's to ---- with a rotary. Elmo got his fb for free. Some guy felt sorry for him because he wrecked his accord and gave him the keys and title. Bastard.

Scoot 4 rotor FD3S ALL MOTOR:

http://www.youtube.com/results?searc...rch_type=&aq=f

I haven't done that much research on 4 rotors but it's either 2 12a's put together or 2 13b's put together, not a production model. Some Aussie company makes 4 rotor e-shafts and pineapple racing has a 4 rotor sitting on their shelf. Not sure how much they want for it but my guess is too much. They are EXPENSIVE to build.

Re: close race between rx7&turbo honda....NOT!!!!
 

the scoot 4 rotor consists of 4 12a rotors and housings.

usually the aftermarket companies use 12a components because its cheaper and allot shorter than using a 13b 4 rotor.

i live walking distance from downing Atlanta and mazmart, and they are one of the phew places that own original 26b's from mazda with the trumpeting carb setups.

people tend to lean towards bridgeporting because they dont damage the apex seals as much as pporting, and also allot of racing classes dont allow p ports. i dont know why, but they dont.

that car is using a large j bridge or, some kind of D shaped peripheral port thats pretty high up.

Re: close race between rx7&turbo honda....NOT!!!!
 

whats a ford 8 inch

Re: close race between rx7&turbo honda....NOT!!!!
 

its a new production model after they realized the 9 inch was too strong they needed something that would break easier. ford wasnt entirely living up to thier name by supplying parts that last.

Re: close race between rx7&turbo honda....NOT!!!!
 

oh you mean the 8.8 :P

Re: close race between rx7&turbo honda....NOT!!!!
 

well they are more for "street cars" they dont and arent ass powerful as the ford 9 inch but they are strong enough for the street.. but also there are alot of rear ends that dont come in cars.. for example teh rear i have in my car is a ford 9 inch from a ford pickup f100....
Attachment 14073