Can you guys grab a dirty 2nd and 3rd?
 

Before I screwed up my motor at 5psi I used to be able to smash 2nd and fry the tires off. But now, at 8.5psi I smash 2nd and get a little chirp if i'm lucky, 3rd is a no go, but when I was n/a with the new build, I could chirp 3rd no problem. What gives?! I think I might unhook my BOV for a few minutes and see if I can bake 2nd. ???

Stan

Re:Can you guys grab a dirty 2nd and 3rd?
 

On a side note, my new clutch chatters a lot, but it's a sprung hub. Used the alignment tool to install it, but the thing chatters all the time, WTF?!

Re:Can you guys grab a dirty 2nd and 3rd?
 

sounds like the clucth isnt grabbing

Re:Can you guys grab a dirty 2nd and 3rd?
 

worn clutch

i use to beable to rev it up at like a 30mph roll and break the tires loose and then twoards the end of the clutch life, it was a no go

Re:Can you guys grab a dirty 2nd and 3rd?
 

It's a brand new ceremic clutch from 88 turbo crx.

Stan

Re:Can you guys grab a dirty 2nd and 3rd?
 

I could chirp third in my sohc zc i/h/e pg7

Your throwout bearing might be going

Mine did exactly what you descripe, loss of power and a grinding/clattering noise up until about 50km/h

Took about 2 days for it to take a ---- nd Id have to row thrrough the gears just to get her going, no power at all

Still havent fixed it lol, waiting my new tranny and a clutch flywheel form a member

Re:Can you guys grab a dirty 2nd and 3rd?
 

The cluch doesn't slip at on the highway or anything (i'd hope not, it's brand new!) and the throw out bearing came with the clutch and it was new too.

Re:Can you guys grab a dirty 2nd and 3rd?
 

Your clutch isn't slipping, your motor just ain't making the power.

Re:Can you guys grab a dirty 2nd and 3rd?
 

don't push your clutch in all the way, I had that problem w/ my clutch specialties clutch, all you have to do is push it in as minimally as possible and it will not chatter anymore.

Re:Can you guys grab a dirty 2nd and 3rd?
 

That doesn't sound like fun. :-X My room mates truck chatters and squeekes like a mother fucker. If you press the clutch peddle in just a tiny bit it goes away.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Can you guys grab a dirty 2nd and 3rd?
 

No problems with mine and I have the unsprung :P the bitch rips first second and willscream third as well.

Re:Can you guys grab a dirty 2nd and 3rd?
 

post video. ;D

Re:Can you guys grab a dirty 2nd and 3rd?
 

i got the clutch specialties unsprung clutch, it chatters a litte bit, but it also has 15 miles on it, i am in the process of breaking it in

Re:Can you guys grab a dirty 2nd and 3rd?
 

my car on the dry asphalt will fry second and chirp 3rd. with my 18's on. that is alot of rotaional weight. if i had 15's it would see 3rd tire im sure.

NEUMAN

Re:Can you guys grab a dirty 2nd and 3rd?
 

Same here I'm running some 17's with 40 series tires. I want to step down though and go biger tire.

Re:Can you guys grab a dirty 2nd and 3rd?
 

Sometimes if I give it a shot of gas in between 1st and 2nd while shifting fast, I can manage to get it to burn the tires in 2nd. But still, I shouldn't have to do that, it used to grab a dirty 2nd when it was n/a. I'm running 205/40/16's that are almost bald, but I don't think that'll make much difference.

Stan

Re:Can you guys grab a dirty 2nd and 3rd?
 

mine doesn`t chip the tire no more once i switched to Azenis..
but i spins when i am close to redline

Re:Can you guys grab a dirty 2nd and 3rd?
 

got the sprung 6 puck from 88 turbo crx as well... chatters when im moving from a stop but I could barely chirp on 2nd. Im at 8psi also... not sure if I just good traction or what the heck is going on... <SHRUG>

Re:Can you guys grab a dirty 2nd and 3rd?
 

the ACT 6 puck i just put in my cousins n/a chirps 3rd all the time and 4th most of the time, and its n/a

Re:Can you guys grab a dirty 2nd and 3rd?
 

I wonder if it's our clutches that are putting a damper on the fun?

Re:Can you guys grab a dirty 2nd and 3rd?
 

I dunnon. I'm having second thoughts on the "SPRUNG" part of the clutch...

Re:Can you guys grab a dirty 2nd and 3rd?
 

Mine seems to grab fine if I want rev it up and dump it in 1st ???

Re:Can you guys grab a dirty 2nd and 3rd?
 

I agree wiht you, it will be fine but im just wondering how much of an affect the springs have on putting down the power... seems to me like thats the one thing we both have in common...

but i think you might have other problems.

Re:Can you guys grab a dirty 2nd and 3rd?
 

My clutch, doesn't chirp in any gear ??? well maybe a little off the line, but other than that nothing... *shrugg*











































Oh yeah maybe it's cause I'm auto :P But my auntie had an auto sentra, that ---- used to chirp when shifting into second, it was fun. Damn I abused that car :P

Re:Can you guys grab a dirty 2nd and 3rd?
 

My oem clutch had springs and didn't have the same problem. And yes, I know my setup has other issues. Would it make sense that if I had an exhaust leak before the turbo, even though it's putting out 8.5psi, that the force for that 8.5psi isn't there because of the exhaust leak? ???

Stan

Re:Can you guys grab a dirty 2nd and 3rd?
 

i couldnt chirp 2nd, then i figured out i was runing 20 psi tire pressure all around. o well i fixed that.

Re:Can you guys grab a dirty 2nd and 3rd?
 

b16Drag no need to shrug you got a sweet ass signature video!


NEUMAN

Re:Can you guys grab a dirty 2nd and 3rd?
 

;) ;D

Re:Can you guys grab a dirty 2nd and 3rd?
 

you shouldn't even have to slam it in to gear to get wheel spin, mine break loose at the top of first and second if i even get on it kind of hard with good tires :P i'm only running a stock clutch disc with act xtreme pp. if i'm really getting on it from a stop, it spins 1-3rd. you've got issues mang.

Re:Can you guys grab a dirty 2nd and 3rd?
 

at 8psi, not 13. :P

Re:Can you guys grab a dirty 2nd and 3rd?
 

stan, did u change the turbo?

Re:Can you guys grab a dirty 2nd and 3rd?
 

Yea hang on, i'll go down to Canadian tire and buy a new one with my canadian tire money. ;D

Re:Can you guys grab a dirty 2nd and 3rd?
 

i was going to suggest lag, wise ass. :P

Re:Can you guys grab a dirty 2nd and 3rd?
 

you shouldn't have a problem breaking them loose at 8 psi either :-\

Re:Can you guys grab a dirty 2nd and 3rd?
 

on a stock rsxS if i'm just going along my merry way in 2nd and floor it i can geta little chirp ;)

Re:Can you guys grab a dirty 2nd and 3rd?
 

It coudl be ur tires are bald and they dont chirp anymore. The tires slip, but now they make a scuffing noise. But some all season tires with good thread on and ull chirp like crazy, i couldnt chirp 2nd with my bald proxxes but with the tires with thread on them i can burn through 2nd. and sometimes 3rd, but i am runnign stock clutch :-\

Re:Can you guys grab a dirty 2nd and 3rd?
 

i thought this thread was gonna be about sloppy 2nds. like ------- a girl right after some guy fucked her and she still has cum in her -----. you wanna grab a dirty 2nd or 3rd?lol

Re:Can you guys grab a dirty 2nd and 3rd?
 

I dont know about a dirty 2nd or 3rd but Ive given a girl a dirty sanchez...does that count?

Re:Can you guys grab a dirty 2nd and 3rd?
 

that cause the stock tires are ----

Re:Can you guys grab a dirty 2nd and 3rd?
 

maybe u just dont know how to drive that ----. haha. i could break traction in 2nd with my z6 at 10 psi. and chirp third. i also had a clutch specialties. but i didnt get it from 88turbocrx. or whatever his sn is. i bought it from their shop. but it was a 6 puck rigid. so stan d16z6's>your b18