Can Someone help me put my clutch in please? Everett 98292 WA
#1
Can Someone help me put my clutch in please? Everett 98292 WA
Can someone please give me a hand doing this? I've never messed with a clutch while it was still in the car. If someone could just stop by for 15 min and point to a few "tricky" things they've learned through experience that would be great. Its a 95integra -
thanks,
Jake
thanks,
Jake
#2
Re: Can Someone help me put my clutch in please? Everett 98292 WA
loosen wheel lugs, jack front of car up take axles off, unhook trans linkage, take slave cylender off at the tranny but dont disconnect the hydrolic lines to it, drain transmission fluid, disconnect the speed sensor, starter and everything else hooked to the tranny. unbolt tranny from block. take mounts off let the transmission slowly drop with a jack under it or a hoist on the top of the motor. pull transmission off. wash hands good. take off presure plate put new clutch disk in, make sure you dont have it turned around. stick in alignment tool. bolt new presure plate on in the right sequence and tork to spec. reinstall transmission.
#8
Re: Can Someone help me put my clutch in please? Everett 98292 WA
You live in those apartments behing hagen? and Im not the one you want helping you with your clutch... trust me. Im still learning and I would prolly only help you ---- it up.. if anything.