bitchasscrackers b18a N20 motor build.....56k beware..........
 

ok just went and picked up all my ---- from the machine shop today. $680 bones ahhhh kinda sucks waching that much money leave your hands all at once, but i guess it will all be worth it when i hear it run. anyways here is the build.

block:
decked b18a1 bored to 81.50mm
pr3 pistons balanced to .25 grams of each other
stock ls rods balanced to .25 grams of each other
stock ls crank balanced to 14k, even though i know i will neve ever go that high
king rod and main bearings, thrust wachers
hasting rings
arp rod bolts

head:
milled stock b18b head
3 angle valve job int. and exh.
rebuild with all new seals and stock springs and retainers
crower 403's
aem true time adj cam gears.

tranny:
stock ls flywheel balanced the same as the crank
stage 1 exedy clutch
arp presure plate bolts
stock rebuilt b18a1 tranny (ys1)

N20:
nitrous exspress wet kit
75 shot jet

engine management:
as for now just the stock pr4 with 8k limit
and b&m fuel pressure regulator

exhaust:
just a wide open chikara header



the car that it is going in is a 91 civic hatch back. fully gutted only a stearing wheel and 2 seats. hoping for high 12's some time next season but i need to get it running and all the bugs worked out.


block pics

http://img525.imageshack.us/img525/1...lock7kp8yp.jpg

http://img525.imageshack.us/img525/5...ock58mf4tf.jpg

http://img525.imageshack.us/img525/5...ock28bp0rg.jpg

pistons

http://img525.imageshack.us/img525/5...ock36bf0je.jpg

cross hasings

http://img525.imageshack.us/img525/7...ock41op9st.jpg

intake ports

http://img525.imageshack.us/img525/1...ymotor21zo.jpg

cam gears

http://img525.imageshack.us/img525/4...ymotor31ld.jpg

head shots

http://img525.imageshack.us/img525/8...ymotor71bs.jpg
http://img525.imageshack.us/img525/1...ymotor88na.jpg
http://img525.imageshack.us/img525/4...ymotor40ig.jpg

cams sig

http://img525.imageshack.us/img525/8...ymotor55rl.jpg

going in the car

http://img525.imageshack.us/img525/773/tonengine9cc.jpg
http://img525.imageshack.us/img525/5...engine20ld.jpg
http://img525.imageshack.us/img525/7...engine34wl.jpg
http://img525.imageshack.us/img525/5...engine45nm.jpg

and i picked up this little boy yesterday for $40 from a friend who bought the wrong one. its an xspower elegidly it is a skunk2 knock off, i never heard of any body using them so i guess i'll be the test monkey.

http://img276.imageshack.us/img276/1...engine55vn.jpg


sorry for all the dark pics they were taken in the garage al like 4:00am. any ways i hope this build goes good i got the motor, tranny, mounts, and ecu, for doing a d15b vtec swap for a buddy, the cams and gears for changing a clutch, and the n2o for $80, so basicly all i got in the motor in machine work, so i guess i got a good deal on everything............... :y

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

dont want to be an ass.... but 75 hit?? so you're gunna run 14s with it? loL :-*

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

nice!

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

My friend brandon @ holeshot performance was running 12.3's on a 90 shot with a stock LS motor with a stock pm6 6k rev limit. now the motor is built and he was breaking it in last night with a 50 shot running 12.4's with the afr's in the 10's. but i would sugest losing the pos nx fogger and get a nos fogger2

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

yea there is a couple kids on honda swap running 12's with b16 i/h/e and 75 shot on slicks

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

must be in a crx... id like to see it!

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

i really like the kit i've had 2 of them and never had a problem.........but i'll look into it

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

the spray pattern is ----. yea rs it is in a crx

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

the kid on honda swap has a hb like mine...

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

WOW ... seems like yesterday we swapped that thing in and watched it blow 45 on the compression gauge ... (when it was a stock ls) its gone a far way since then ... cant wait to do some rippers in it

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

a pm6 doesnt redline at 6k, and a stock ls motor with a 75 shot isnt gonna get anywhere close to 12's, ive seen it many many times.

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

but to bitchasscracker it looks sweet, looks like you took your time and spent your money wisley. good luck

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

ignorance is bliss isnt it. the crx i speak of went 13.0 on a stock LS and hit 12.3 on a 90 shot. now it has a built motor and a 9k rev limit. Ive seen it many times with my own eyes.

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

yea been 9 months in the building

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

dude fuckn gsr's in crx dont even run 12's stock, ive seen 13.2's and 13.1's on drag radials, o well i wouldnt beleive it til i seen it but thats kool i guess :6

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

all that money , and nitrous use, stock internals though? bad judgement imo.

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

do the math. 140 stock hp add 90hp via n20 thats 230. now put that in a 1700lbs crx and mate it with some 24 inch slicks and if you can drive worth an ass you will get 12's no prob. SRD has a 162whp ef hatch running 12.6 in the 1/4. I guess the ppl youve seen dont know how to build their cars

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

better than hoping for 400hp. now you see how everyone is looking at you josh.

on the other side, BAC, good luck. I think you have some real goals set.

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

what crx weighs 1700lbs with driver LOL

bare metal with one seat and nothing else?

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

1850 with driver. just a bare crx with cage fiberglass front end

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

oh so a dragster... sweet LOL

high 12s in a dragster that ought to impress the ladies

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

you have seen it in a hb and even replied to this guys post...........come on dude


https://www.homemadeturbo.com/forum/...?topic=53996.0

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

Wow, definately one nice build! I want some video footage of this thing once it's all set.

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

josh ill bet you this thing hits 12's before you hit 400 whp :y

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

make a video so we can watch :)

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

looks good mang. def need a vid once you get it running good.

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

i will post a video for sure when i gt it running, just need a distributor and my wire harness from rywire....

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

Lotta bench race action, yeeeeeeeeeeehaaa

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

Daniel Trimnal's gutted 90 DX hatch w/ stock LS swap was running consistent 8.9's in the 1/8th on ---- 13" steelies with half bald rubber. That's in the 13.6-13.8 1/4 miles range. It was funny to watch him pull on LS1 Camaros, Evos, STi, etc...

---- the haters, bro, your setup isn't the one I would build but 12's should be no problem.

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

???

1700lb car, should only need 170 whp to get 12.9's.

NOW everyone knows why I like HF's...

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

the haters really dont bother me all that much, the more i have people telling me i cant do something the more i want to accomplish it........

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

lmao, 8.9 is a shitty 1/8th...

pulling 9.0s in my old integra running low 14s

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

ya that is kinda shitty 1/8 maybe shitty launching or something ...

Re: bitchasscrackers b18a N20 motor build.....56k beware..........
 

I think he will be quicker than that. a buddy of mine out here in colorado was running a d16a6 with a 75 shot and was in the high 13's.

very bad ass setup, I like it, I cant wait to hear what you do with the turbo setup your getting from me and the motor its going on also sounds bad ass