Bag on this faggot CAVILIER PEICE OF ----
#31
Re: Bag on this ****** CAVILIER PEICE OF ----
I really do hate Cavaliers and Ecotec motors. They're bullshit. More power to you for turbocharging a huge piece of garbage. You can't polish a turd, but you can turbocharge it.
#32
Re: Bag on this ****** CAVILIER PEICE OF ----
Originally Posted by SinisterCRX
Basically you have no clue what your setup is, right?
so you had a shop build your manifold and piping and then they put it on for you because you don't own a 10, 12, or 14mm wrench and screwdriver?
#33
Re: Bag on this ****** CAVILIER PEICE OF ----
what do you mean?
I know my whole setup piece by piece... I have taken it all off and put it back on to fix somethings with the help of my room mate..
we were also the first people to ever put a full msd ignition (including coil packs, plug wires and coils) onto an ecotec...
cnfx made the manifold, downpipe and ran the charge pipes and installed the rest of the kit because I was still in school and didnt have access or the knowledge of welding, plasma cutting and that sort.
I know my whole setup piece by piece... I have taken it all off and put it back on to fix somethings with the help of my room mate..
we were also the first people to ever put a full msd ignition (including coil packs, plug wires and coils) onto an ecotec...
cnfx made the manifold, downpipe and ran the charge pipes and installed the rest of the kit because I was still in school and didnt have access or the knowledge of welding, plasma cutting and that sort.
#34
Re: Bag on this ****** CAVILIER PEICE OF ----
Originally Posted by jeffsciv23
BINGO
so you had a shop build your manifold and piping and then they put it on for you because you don't own a 10, 12, or 14mm wrench and screwdriver?
so you had a shop build your manifold and piping and then they put it on for you because you don't own a 10, 12, or 14mm wrench and screwdriver?
#35
Re: Bag on this ****** CAVILIER PEICE OF ----
i don't know how i would have gotten through my installs with out my plasma cutter
#36
Re: Bag on this ****** CAVILIER PEICE OF ----
Originally Posted by jeffsciv23
i don't know how i would have gotten through my installs with out my plasma cutter
#37
Re: Bag on this ****** CAVILIER PEICE OF ----
Originally Posted by TurboEco
what do you mean?
I know my whole setup piece by piece... I have taken it all off and put it back on to fix somethings with the help of my room mate..
we were also the first people to ever put a full msd ignition (including coil packs, plug wires and coils) onto an ecotec...
cnfx made the manifold, downpipe and ran the charge pipes and installed the rest of the kit because I was still in school and didnt have access or the knowledge of welding, plasma cutting and that sort.
I know my whole setup piece by piece... I have taken it all off and put it back on to fix somethings with the help of my room mate..
we were also the first people to ever put a full msd ignition (including coil packs, plug wires and coils) onto an ecotec...
cnfx made the manifold, downpipe and ran the charge pipes and installed the rest of the kit because I was still in school and didnt have access or the knowledge of welding, plasma cutting and that sort.
when i asked your setup, i was curious about what turbo, wastegate, intercooler etc.
i dont really give 2 ***** that your car was the first to get a MSD setup.
my guess is the car that MSD used for R&D was the first car to get that setup, not you, but you may continue to believe what you want...
If you know what ur setup is, then post up, if not, go ----- it up at jbody.org
#38
Re: Bag on this ****** CAVILIER PEICE OF ----
This is going to get ugly quick, so I'm gonna post and run...
Compton - Welcome to HMT. You can't roll up on a 26 post count and expect HMT folks to answer any battle cry you may make. Hang out, contribute, earn your place, and then maybe....
TurboEco - Welcome to HMT. Display some knowledge of your own system quickly, before these guys smell Noob blood! Otherwise, your set for some bashing like Bukkake (Buk9tp) received. Hang out, learn, teach, etc...
Craig
Compton - Welcome to HMT. You can't roll up on a 26 post count and expect HMT folks to answer any battle cry you may make. Hang out, contribute, earn your place, and then maybe....
TurboEco - Welcome to HMT. Display some knowledge of your own system quickly, before these guys smell Noob blood! Otherwise, your set for some bashing like Bukkake (Buk9tp) received. Hang out, learn, teach, etc...
Craig
#39
Re: Bag on this ****** CAVILIER PEICE OF ----
Originally Posted by quadtech
when i asked your setup, i was curious about what turbo, wastegate, intercooler etc.
i dont really give 2 ***** that your car was the first to get a MSD setup.
my guess is the car that MSD used for R&D was the first car to get that setup, not you, but you may continue to believe what you want...
If you know what ur setup is, then post up, if not, go ----- it up at jbody.org
so there for I AM the first with this setup... and I was the one R&D'ing along with a buddy of mine
tial 38mm wastegate
turbonetics t3/t4 turbo with ball bearing upgrade, big shaft upgrade and stage 3 wheel
cartech begi fmu
2.5 inch downpipe
2.5 inch charge pipes
johhny race car 6 inch intercooler
3 inch mandrel bent custom tubes catback
saab 370cc injectors
aeromotive afpr
custom 2002 ecotec fuel rail
HBC In car boost controller kit
log style manifold
greddy type s BOV
innovate LM-1 wide band
autometer boost and fuel gauges
anything else you want to know?
part numbers for the msd products?
#40
Re: Bag on this ****** CAVILIER PEICE OF ----
Originally Posted by TurboEco
there is no msd setup for us without taking out our power steering and spending 900 dollars on the setup..
so there for I AM the first with this setup... and I was the one R&D'ing along with a buddy of mine
anything else you want to know?
part numbers for the msd products?
so there for I AM the first with this setup... and I was the one R&D'ing along with a buddy of mine
anything else you want to know?
part numbers for the msd products?