b16 mounts dont fit!!!!!!! help! (UPDATED WITH PICS)
#1
b16 mounts dont fit!!!!!!! help! (UPDATED WITH PICS)
I got a set of motor mounts from innoviative off egay for a b16 with hydraulic trans. OK I go to install everything and the driver mount is completly off nothing fits at all i have an obd1 b16 going into a crx si already converted to obd1 what to do!! get hasport mounts instead? or try and find a different bracket? any help would be great!!!
#4
Re: b16 mounts dont fit!!!!!!! help!
Originally Posted by NBLKID
if you ordered the mounts for a b16 with hydro trans they prolly sent you eg motor mounts, unless you specified it was going into a crx
Most likely. Post the ebay link.
#8
Re: b16 mounts dont fit!!!!!!! help!
i'm still looking for the ebay link but this is the set i ordered from ebay http://www.innovativemounts.com/Show...x?prodid=49150 yes the world of reading does own. ill try and take some pics
the mount on the trans seems to be fine and only the drivers side is the crazy one! and i need my car to go to work monday yay!
the mount on the trans seems to be fine and only the drivers side is the crazy one! and i need my car to go to work monday yay!
#9
Re: b16 mounts dont fit!!!!!!! help!
#10
Re: b16 mounts dont fit!!!!!!! help! (UPDATED WITH PICS)
they sent you the wrong mounts. Email them even a retarded wouldnt sell a product that bad. Mistakes happen dont waste your time on here call them and get the right ones
Also regardless of what h-t says either get a factory pulley machined down or beat in your chassis for the crank pulley clearnces
Also regardless of what h-t says either get a factory pulley machined down or beat in your chassis for the crank pulley clearnces