Audio Gurus, need some info on this amp
04-08-2008, 10:29 PM
#1
0.0 BAR
Thread Starter
Join Date: Nov 2005
Posts: 0
Audio Gurus, need some info on this amp
Well I got this amp a few years ago as part of a trade with a friend. I never used it and just put it in the basement. Decided to try to find some specs on it, but can't seem to find any. I know Fultron use to make really good tweeters, but I don't know anything about their amps. Any help is appreciated.
There is no model number on it and I can't find specs for it anywhere.
There is no model number on it and I can't find specs for it anywhere.
04-09-2008, 03:17 AM
#7
0.0 BAR
Thread Starter
Join Date: Nov 2005
Posts: 0
Re: Audio Gurus, need some info on this amp
Originally Posted by Mista Bone
Contact Memphis Audio 
CA150 is the model number
CA150 is the model number
Originally Posted by brine04
Who cares. It's a small 2 channel so you will just be using it for door speakers which are nearly all 4 ohm.
04-09-2008, 03:34 AM
#8
0.0 BAR
Join Date: Mar 2006
Posts: 0
Re: Audio Gurus, need some info on this amp
yeah fultron used to be memphis untill the 90's. I actually used to be a Memphis car audio exclusive dealer. they have good ----. thats a small amp there buddy. honestly i would use that amp to run full range rear speakers 6x9's or a good pair of 6.5's.
for the ohm load. dont worry about it. just run one speaker to each channel and adjust amp accordingly. make sure when you first turn it on, leave all of the adjustments down. if i was using that for an amp for full range. i would leave the amp adjusted to about half on the freq. and adjust the gain accordingly...... dont adjust the gain too high though. those amps are known to make a pop sound out of the speakers when they turn off/on
----.. i would rock it.
im just a big believer of the memphis belle
here is part of a sys i did in my brothers stang......
4 12's
my deck relocation.....
please keep in mind that this was day 1 of a 1 month project
for the ohm load. dont worry about it. just run one speaker to each channel and adjust amp accordingly. make sure when you first turn it on, leave all of the adjustments down. if i was using that for an amp for full range. i would leave the amp adjusted to about half on the freq. and adjust the gain accordingly...... dont adjust the gain too high though. those amps are known to make a pop sound out of the speakers when they turn off/on
----.. i would rock it.
im just a big believer of the memphis belle
here is part of a sys i did in my brothers stang......
4 12's
my deck relocation.....
please keep in mind that this was day 1 of a 1 month project
