anyone know anything about mustangs?
 

we have an 04 mustang GT we are wanting to boost...but where would we get vacuum sources from? it only has one source of vacuum and it has a hard line comming off of it...in order to change the hardlines i have to remove the upper intake...it dosent have a vacuum powerd brake booster either, it has "hydraboost" uses the powersteering pump instead
and no fuel pressure regulator it has a returnless system. it uses a sensor on the fuel rail to tell the ecu what teh pressure is and the pumps are variable speed...any other way i can get vac. source?

Re: anyone know anything about mustangs?
 

Cut a 4 inch hole in your intake manifold and t it off lol. No really you should just cut the hard line and put a t fitting inbetween the 2 ends

Re: anyone know anything about mustangs?
 

i know its a pos ford. but they have potential if they have chevy 350's in them with boost.

Re: anyone know anything about mustangs?
 

yea, they suck :P

Re: anyone know anything about mustangs?
 

tap the intake mainfold

Re: anyone know anything about mustangs?
 

mustang boys have less than adequate wee wees
especially the ones whos mother was fucked in one
other than that, they are cool cars
btw this is a tech question, mamas boy

Re: anyone know anything about mustangs?
 

The drag queen is right. :P

Re: anyone know anything about mustangs?
 

Your kidding right. Turbo'd it will ---- all over most every small block anything in the same build.

Re: anyone know anything about mustangs?
 

SBCs arent total ---- after you remachine every surface in the engine...

Re: anyone know anything about mustangs?
 

sbc is the most used, most popular, and most successfull engine platform ever made.

Re: anyone know anything about mustangs?
 

I just finished the downpipes and wastegate recircs on my buddy Mike's twin turbo SBC. It made 1100hp on the engine dyno and it was restricted due to small exhaust housing. The Camaro should go 8's through the mufflers.

Re: anyone know anything about mustangs?
 

my mom has had three mustangs...total vagina car.

Re: anyone know anything about mustangs?
 

every girl at my school drives a civic/integra/rsx/cavalier. they're real manly.

Re: anyone know anything about mustangs?
 

duh civic hatchs are the manliest car..... IN EUROPE!

Re: anyone know anything about mustangs?
 

that wasn't the point to be argued, nice try cock monger.

Re: anyone know anything about mustangs?
 

I didn't argue anything, fat ----. I just made an asinine statement, like yourself. So, go suck the ---- out of your x roomates -------.

Re: anyone know anything about mustangs?
 

Pics?

Re: anyone know anything about mustangs?
 

& video? Sounds sweet :)

Re: anyone know anything about mustangs?
 

Mustand crowd is usually tools but this applies to hondas has well

Re: anyone know anything about mustangs?
 

anyone in a crowd is a tool

Re: anyone know anything about mustangs?
 

tard.

Re: anyone know anything about mustangs?
 

belie dat

Re: anyone know anything about mustangs?
 

Yeah, but they aren't worth much until, as I said, you redo every machining tolerance in the entire engine. Just look at water pump mounting surfaces... lol.

Re: anyone know anything about mustangs?
 

::)

dumb dumb dumb

Re: anyone know anything about mustangs?
 

Show me a single stock SBC (or LT1) that makes over 400 whp without shitting #7 and #8 pistons due to incorrect factory tolerances.

Re: anyone know anything about mustangs?
 

google stock block turbo sbc

Re: anyone know anything about mustangs?
 

Uh what about the water pump mounting surfaces?

The design is old and the process to cast the blocks is ancient. I have heard of core shift causing more reliability problems than the factory machining itself.

Regardless the platform itself is unarguably sucessful. I guess the same could be said about the windsor engines as well though. :-\

Re: anyone know anything about mustangs?
 

doN't JooO KnOw DaT EnIgNes MaDe In 1967 by HumAnZ ArN'Et As TiGhT aS OnEs MaDe In 1997 By RobOts

Re: anyone know anything about mustangs?
 

gargle jd penis ftw

Re: anyone know anything about mustangs?
 

RS you're a fucktard. I am not saying that they are ---- because they were made in the 60s. If I am not mistaken the first SBC came out in 1955 as the 265. All I am saying is that they are bound to have flaws since GM was humping pretty much the same tooling for the past 50 years.

Go gargle some whale penis. :-*

Re: anyone know anything about mustangs?
 

i wasn't talking to you dipshit, that was directed at homo joseph

keep your mouth shut

Re: anyone know anything about mustangs?
 

You're good with the web design, mediocre with the sarcasm, and pathetic thinking that a common as dirt junkyard turbo setup on a 5.0 makes you an Authority.

So, keep the zingers coming! Short of ridding HMT of the spambot menace, it's really all you have to offer. ::)

Re: anyone know anything about mustangs?
 

coming from the guy who compares blocks cast in iron in 1964 and machined by hand to blocks cast in aluminum in 1997 and machined by robots

oo, and all your friends cars make you an authority too ;)

Re: anyone know anything about mustangs?
 

I did nothing of the sort. I merely elaborated on the incomplete statement that SBC were a good platform... ever since SBC were brand new, machinists have found the need to bring every last single machined surface into a tighter tolerance before they could begin to extract any real power out of them, and most of this has taken place on human controlled machining equipment. At no time where they compared to robot-machined aluminum except in your illogical mind.

Like I said, mediocre zingers.

Re: anyone know anything about mustangs?
 

stock shortblock non efi 4 bolt sbc motors can make a lot of power you just cant rev them very high.

d15 > everything

Re: anyone know anything about mustangs?
 

I still stand by you eating a delicous whale penis. :-*

lol. Maybe in some peoples minds. ::)

Re: anyone know anything about mustangs?
 

I bet a lot of Eskimos did that.

Re: anyone know anything about mustangs?
 

I love you guys.

Re: anyone know anything about mustangs?
 

delicous huh? you've tasted one? you could win 50 thou on fear factor, you got the penis eating down.

Re: anyone know anything about mustangs?
 

meh, Hotrex says that there is nothing wrong with a delicioous penis. So I assume it all tastes the same. :l