ANYONE IN HERE KNOW ABOUT BMW ....PLEASE HELP
 

my friend has a 00 bmw 330 ci coupe he was in 3rd gear then he miss shift into 2 when trying to go into 4 so then it red line but he let off right away then the car start misfiring so we check out all the plug n it got spark on all 6 cylinder but injector number 2 seem to not work i put a screw drive on the injector to listen to it click but it had no click i also swap injector from cylinder 1 to see if it work still no click but i got power going into it and when i take hard turn the car run fine then misfire again shortly and thier a clicking sound under the car ..... anyone can help me ? i dont know if you guy understand me but ill try explain more if u want thankss

Re: ANYONE IN HERE KNOW ABOUT BMW ....PLEASE HELP
 

reset the computer. and try the tech forum for these kind of questions

Re: ANYONE IN HERE KNOW ABOUT BMW ....PLEASE HELP
 

do a compression check

Re: ANYONE IN HERE KNOW ABOUT BMW ....PLEASE HELP
 

i did a comp check and i did rest the ecu

Re: ANYONE IN HERE KNOW ABOUT BMW ....PLEASE HELP
 

any faults stored... if you have a scanner?
how do you "know" that your getting spark in all 6 cylinders?
which manufacturer coils are installed- there was a recall on the BREMI...
what octane rating fuel was put in the vehicle?
check fuel pressure just to rule it out.. should be 3.5bar +/- 0.2

let me know if you have any other info.

Re: ANYONE IN HERE KNOW ABOUT BMW ....PLEASE HELP
 

I know most newer cars ECM's, especially german, have a permanent bitch mode if they see certain perameters (temp,rpm,oil press) waaay out of boundary. If you can afford the BMW you can afford the rapage at the dealer :X.

Re: ANYONE IN HERE KNOW ABOUT BMW ....PLEASE HELP
 

i have a scaner and the code was manufacture irnition sytem or misfire and i got spark in 6 cylinder because i pull all the coil out and i did see spark and yes i do have bremi coil but isnt it just for 03- 05 bmw? octance is 93 and if u said newer car got permanent bitch mode if they see rpm oil temp out of boundary then it propley right because the car did red line ..... well thank guysz

Re: ANYONE IN HERE KNOW ABOUT BMW ....PLEASE HELP
 

i find out today that when i take hard turn mostly right turn the car stop misfire so i open the hood and check the injector it seem like it working but then it stop after a little bit and the car run like ---- again so i wounder y the injector some time run and sometime dont i have swap injector around and they all seem fine only cylinder number 2 got proplem could it be the ecu or wire harness ---- up some where ?

Re: ANYONE IN HERE KNOW ABOUT BMW ....PLEASE HELP
 

Why dont you bring it by BMW and get it diagnosed and then just fix it yourself.That cant rape ya that bad to just diagnose the problem i would think.

Re: ANYONE IN HERE KNOW ABOUT BMW ....PLEASE HELP
 

yup that wat imma do thank for ever1 help