Re: anybody familiar with dirtbikes? CR80 swing arm bolt frozen
 

if it was a "piece of cake" you wouldnt be on here begging for mercy.

Re: anybody familiar with dirtbikes? CR80 swing arm bolt frozen
 

did you take the rear wheel off and everything, or are you just going after the pivot bolt itself?

Re: anybody familiar with dirtbikes? CR80 swing arm bolt frozen
 

i just need to get out the pivot bolt that goes through frame/swing arm/motor. the tire is coming off too though to change the sprocket and rotor.

Re: anybody familiar with dirtbikes? CR80 swing arm bolt frozen
 

used to happen alot on my old yz cause around here theres alot of sand and it gets in there and other gunk and ----, i used to use a 3/8ths long extention and take the nut off and hit that a few times popped right out. and ---- all that work and bs putting the bearing in, get a socket equivilent in size of the outer race on the bearing, and gently tap that ---- in, theres not much on a 2 stroke enigne and bike itself you cannot do in your own back yard.

Re: anybody familiar with dirtbikes? CR80 swing arm bolt frozen
 

haha, hotsex and his lowballing antics.



$300 shipped?

Re: anybody familiar with dirtbikes? CR80 swing arm bolt frozen
 

the shock is putting pressure on the swingarm, undo the linkage like i said before and try again, i'm willing to bet thats your problem. once you relieve that pressure, the pivot bolt will come right out.

Re: anybody familiar with dirtbikes? CR80 swing arm bolt frozen
 

good point

Re: anybody familiar with dirtbikes? CR80 swing arm bolt frozen
 

lol for not removing shock/linkage /whee; first...

hahahaahhahah

if i knew that i would have made fun of you 10x more/

------ ameteurs

Re: anybody familiar with dirtbikes? CR80 swing arm bolt frozen
 

c'mon now ::) i did that first lol, got it out with the air hammer at work. of course it was full of dirt and the bolt was pitted from corrosion