AEMFREAK (Drew) IS IN THE HOSTPIAL!!!!
08-07-2006, 06:47 PM
#381
3.0 BAR
Join Date: Aug 2003
Location: NE-PA
Posts: 4,666
Re: AEMFREAK (Drew) IS IN THE HOSTPIAL!!!!
How the ---- did I miss this entire thread? 
I feel left out on the ---- talkin, oh well...too much work ownz me :P
Wow, if this is her parts list I feel sorry for her...mostly for being a complete idiot when it comes to power adders 
Ok, so you've got a torqueless b16...whoopee. You Ported and polished the head...meaning you probably fucked your head all up for not knowing proper porting technique and flow principles. Pistons but not rods...hmm...why would you go through all that work to leave a weak link? Cam gears....yay...so you can adjust your stock cams out of your powerband, or try to adjust your powerband back to where it's supposed to be from adding that Skank2 intake manifold that's made for high rpm power...you know, the rpm your stock rods won't usually handle. :P On top of it is some twisted piece of space wasting turbo manifold, the "medusa" design coupled with a small, old gt28rs turbo (ooooh, ahhhh, shitty :P) that's considered small on a b16, coupled with "injectors" that are probably run off an fmu. :P And just to make things a little more interesting in your self-proclaimed motor building world, are underdrive pulleys that will destroy your crank bearings and kill your oil pump. So far from what I see is a way too much money spent on worthless parts for a sub 250hp-ish car. :1 You have many flaws in your build...maybe you should actually pay attention to what some of us "poor people" have to say about engine building and turbo setups...you might actually learn something from some of us who have been doing this since you were potty training, but i doubt it. Your mouth is obviously way bigger than your brain's ability to learn. 
I feel left out on the ---- talkin, oh well...too much work ownz me :P
wow. you really know nothing about civic's huh? The B16A2 didn't come in the 1993 Civic, it came out of the 1999 Civic Si that I pulled both motors myself (D16Z6) and swapped them. While the B16A2 motor was out I port and polished the head myself. I upgraded the pistions, cam gears, underdrive pulleys and even the injectors. I used the medusa header and the disco potato turbo along with the skunk2 intake manifold. There was also alot more custom work done. I'm sorry if you don't know what these parts are...and a poor person probably wouldn't. Foodstamps don't buy QUALITY car parts or brains for that matter. Go back to ur corner bitch and watch ur ****** mouth.
Ok, so you've got a torqueless b16...whoopee. You Ported and polished the head...meaning you probably fucked your head all up for not knowing proper porting technique and flow principles. Pistons but not rods...hmm...why would you go through all that work to leave a weak link?
Cam gears....yay...so you can adjust your stock cams out of your powerband, or try to adjust your powerband back to where it's supposed to be from adding that Skank2 intake manifold that's made for high rpm power...you know, the rpm your stock rods won't usually handle. :P On top of it is some twisted piece of space wasting turbo manifold, the "medusa" design coupled with a small, old gt28rs turbo (ooooh, ahhhh, shitty :P) that's considered small on a b16, coupled with "injectors" that are probably run off an fmu. :P And just to make things a little more interesting in your self-proclaimed motor building world, are underdrive pulleys that will destroy your crank bearings and kill your oil pump. So far from what I see is a way too much money spent on worthless parts for a sub 250hp-ish car. :1 You have many flaws in your build...maybe you should actually pay attention to what some of us "poor people" have to say about engine building and turbo setups...you might actually learn something from some of us who have been doing this since you were potty training, but i doubt it. Your mouth is obviously way bigger than your brain's ability to learn.
08-08-2006, 12:24 AM
#382
3.0 BAR
Join Date: Feb 2006
Posts: 1,983
Re: AEMFREAK (Drew) IS IN THE HOSTPIAL!!!!
Originally Posted by slo_crx1
How the ---- did I miss this entire thread? I feel left out on the ---- talkin, oh well...too much work ownz me :P
Wow, if this is her parts list I feel sorry for her...mostly for being a complete idiot when it comes to power adders
Ok, so you've got a torqueless b16...whoopee. You Ported and polished the head...meaning you probably fucked your head all up for not knowing proper porting technique and flow principles. Pistons but not rods...hmm...why would you go through all that work to leave a weak link? Cam gears....yay...so you can adjust your stock cams out of your powerband, or try to adjust your powerband back to where it's supposed to be from adding that Skank2 intake manifold that's made for high rpm power...you know, the rpm your stock rods won't usually handle. :P On top of it is some twisted piece of space wasting turbo manifold, the "medusa" design coupled with a small, old gt28rs turbo (ooooh, ahhhh, shitty :P) that's considered small on a b16, coupled with "injectors" that are probably run off an fmu. :P And just to make things a little more interesting in your self-proclaimed motor building world, are underdrive pulleys that will destroy your crank bearings and kill your oil pump. So far from what I see is a way too much money spent on worthless parts for a sub 250hp-ish car. :1 You have many flaws in your build...maybe you should actually pay attention to what some of us "poor people" have to say about engine building and turbo setups...you might actually learn something from some of us who have been doing this since you were potty training, but i doubt it. Your mouth is obviously way bigger than your brain's ability to learn.
I feel left out on the ---- talkin, oh well...too much work ownz me :PWow, if this is her parts list I feel sorry for her...mostly for being a complete idiot when it comes to power adders
Ok, so you've got a torqueless b16...whoopee. You Ported and polished the head...meaning you probably fucked your head all up for not knowing proper porting technique and flow principles. Pistons but not rods...hmm...why would you go through all that work to leave a weak link?
Cam gears....yay...so you can adjust your stock cams out of your powerband, or try to adjust your powerband back to where it's supposed to be from adding that Skank2 intake manifold that's made for high rpm power...you know, the rpm your stock rods won't usually handle. :P On top of it is some twisted piece of space wasting turbo manifold, the "medusa" design coupled with a small, old gt28rs turbo (ooooh, ahhhh, shitty :P) that's considered small on a b16, coupled with "injectors" that are probably run off an fmu. :P And just to make things a little more interesting in your self-proclaimed motor building world, are underdrive pulleys that will destroy your crank bearings and kill your oil pump. So far from what I see is a way too much money spent on worthless parts for a sub 250hp-ish car. :1 You have many flaws in your build...maybe you should actually pay attention to what some of us "poor people" have to say about engine building and turbo setups...you might actually learn something from some of us who have been doing this since you were potty training, but i doubt it. Your mouth is obviously way bigger than your brain's ability to learn.
08-08-2006, 12:51 AM
#383
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re: AEMFREAK (Drew) IS IN THE HOSTPIAL!!!!
Haha, she says HMT kits are rice, yet I went threw aidsfreak's old posts, and he was wheelin and dealin ---- parts. Way to go sista, do some ------- back ground work before you come here and spew a gospel rant about your ****** friend with aids.
ps, hope he dies soon
ps, hope he dies soon
08-08-2006, 12:52 AM
#384
0.0 BAR
Join Date: Jun 2006
Posts: 45
Re: AEMFREAK (Drew) IS IN THE HOSTPIAL!!!!
Originally Posted by Travis
ps, hope he dies soon
Amen.
08-08-2006, 01:00 AM
#385
0.0 BAR
Join Date: Feb 2005
Posts: 0
Re: AEMFREAK (Drew) IS IN THE HOSTPIAL!!!!
hrmm
08-08-2006, 01:04 AM
#386
3.0 BAR
Join Date: Feb 2006
Posts: 1,983
Re: AEMFREAK (Drew) IS IN THE HOSTPIAL!!!!
Originally Posted by rawr
hrmm
08-08-2006, 01:32 AM
#387
0.0 BAR
Join Date: Jun 2006
Posts: 45
Re: AEMFREAK (Drew) IS IN THE HOSTPIAL!!!!
So if I donate and this kid dies do I get my money back with interest?
08-08-2006, 02:03 AM
#388
3.0 BAR
Join Date: Jan 2006
Posts: 2,875
Re: AEMFREAK (Drew) IS IN THE HOSTPIAL!!!!
Originally Posted by 40ozToBoost
So if I donate and this kid dies do I get my money back with interest?
08-08-2006, 02:05 AM
#389
0.0 BAR
Join Date: Jun 2006
Posts: 45
Re: AEMFREAK (Drew) IS IN THE HOSTPIAL!!!!
Im already in on the pool, im just looking for more ways to profit off this **** painful death.
08-08-2006, 02:19 AM
#390
1.5 BAR
Join Date: Nov 2005
Posts: 828
Re: AEMFREAK (Drew) IS IN THE HOSTPIAL!!!!
i can think of better places to donate money to than some gangsta wannabe girls friend with mono..
if you really wanna help someone by donating money, help these guys, or your local shelter please.
http://www.mprgroup.net/misc/spsummer06.html
http://www.mprgroup.net/misc/blossom.html
if you really wanna help someone by donating money, help these guys, or your local shelter please.
http://www.mprgroup.net/misc/spsummer06.html
http://www.mprgroup.net/misc/blossom.html
