92 radiator in an 89
 

obviously this has been done many times, but i am going to have to use a 92 radiator for turbo clearance, just trying to get some feedback on it, will i be better off to lean the top back and make custom top brackets, or to cut a chunck of the cross member out and build custom lower brackets??? are there any "how to's" on this posted anywhere?

Re:92 radiator in an 89
 

zip ties :)

http://crxpage.com/images/crx/1217/07.jpg

Re:92 radiator in an 89
 

Man that is sketchy, at least its... light.

Re:92 radiator in an 89
 

Almost as good as duct tape!

Re:92 radiator in an 89
 

no way, the radiator filled up cant be more than 5 lbs, it would take more than that to bust 4 zip ties, the only thing i could see happening is they might melt, and even then i doubt it would melt all 4

Re:92 radiator in an 89
 

Zip ties work on everything. used an ass of them on a friends turbo project...had to put 92 rad in his 00 teg.

Re:92 radiator in an 89
 

Tie wraps are the ----. At one point in time the front end of my daily driver was almost completely hold togheter with it. Makes easy and fast dismanteling though.

http://www.student.kun.nl/p.oonincx/205xs/IM003134k.jpg

See that yellow grip, with that you can take out my engine in about 5 minutes ;D

Re:92 radiator in an 89
 

I supported mine with the upper and lower radiator hoses.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote