90dx's project VX
9 Attachment(s)
So i picked up this dirty little VX hatch a few months ago and finally got the little slut turboed :6 It started as a 300+kms D15Z that was slower then balls.I started by redoing the undercarrriage with a full ES bushing kit,cross drilled slotted rotors,stainless lines,Ksport coilovers and all new ball joints, tie rods etc.It then handled much better but still sucked so i then proceeded to rip out the D15 and install a B18B with a GSR tranny and that was a def improvement.Next up i threw out the beat to ---- moldy interior.Last i was time for some boost so it got the following:
Holset HY35W [thanks B18turboef :)] custom sch10 ramhorn no name 24x12x3 intercooler 44mm OBX intimidator wastegate :D 50mm OBX blow off valve custom 2.5" alum charge pipe [my buddy did the tig welding] 3" stainless downpipe 550cc injectors,walbro pump and running Crome We got it running on sat and headed to the track to test it running a basemap i made rich as ---- and 1' per psi of retard.It ran a 12.9 at 105mph [1.9 60] on 8psi.Im going to install ARP headstuds this weekend and then head down for some tuning on the dyno hopeing for 300whp and low 12's.I have a extra B18 block i will either put some forged rods and pistons in quickly or i might wait and sleeve it over winter.Ripper vids to come i have some footage from the track as well. Attachment 25673 Attachment 25674 Attachment 25675 Attachment 25676 http://i50.photobucket.com/albums/f3...ojectVX009.jpg http://i50.photobucket.com/albums/f3...omputer010.jpg Attachment 25677 Attachment 25678 Baking valve cover after welding two -12 fittings in and wrinkle painting :D http://i50.photobucket.com/albums/f3...omputer008.jpg Attachment 25679 Attachment 25680 Attachment 25681 Ebay 3" catback that fits perfect i bought a Vibrant 3" flat black muffler to replace the fart can.It was 109 + shipping for the exh :o http://i50.photobucket.com/albums/f3...x/IMG_0149.jpg http://i50.photobucket.com/albums/f3...x/IMG_0151.jpg |
Re: 90dx's project VX
from nothing to something haha.
good ---- man |
Re: 90dx's project VX
|
Re: 90dx's project VX
Next time i think i will cut the bumper after checking it against the intercooler i cut too much out and it looks like its smiling now :D
|
Re: 90dx's project VX
Looks nice man, thumbs up
|
Re: 90dx's project VX
Nice clean install, WHERE'S THE JB WELD? :P
Good work. |
Re: 90dx's project VX
Good job.
Its too bad it had to be a vx though. Those are hard to find unmolested now. I am still amazed at the fuel economy they will get. Its better than a golf tdi or a toyota prius which is a hybrid vehicle. |
Re: 90dx's project VX
When I ran my VX rims, I wanna say it was a 7mm spacer and it didn't look like it was rollin' on steelies and then nice Yoko Advan rubber. Looks nice but damn why slam that thing so ------- low. Looks kinda ghetto.
|
Re: 90dx's project VX
simple yet effective. Im diggin it
|
Re: 90dx's project VX
hmt goodness right there. :y
|
All times are GMT -5. The time now is 03:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands