87-89 integra rods
Ok so now i know that you can put these in to a D16A6 but will they fit my stock pistons/pins or do i need the integra pistons as well? also if taking out my pistons do i need to hone out the block and get new rings before i put the pistons back in? and do i have to re-ballance the rods or can i just simply put everything together without a hassle?
|
Re:87-89 integra rods
The correct way would just take the pistons and rods to the machine shop and have them pressed in.
Re-honeing the block? yes, I probably would put a quick hone job on the cylinder so the rings would seal. Balancing the bottom end? well, technically you should since the 87-86 rods are heavier than the stock ones, but I am sure you could do it without problems. Lots of people slap in eagles/crowers without doing a thing. JEff |
Re:87-89 integra rods
Posted by: AbaZ Posted on: Today at 12:52:20pm
"The correct way would just take the pistons and rods to the machine shop and have them pressed in. Re-honeing the block? yes, I probably would put a quick hone job on the cylinder so the rings would seal. Balancing the bottom end? well, technically you should since the 87-86 rods are heavier than the stock ones, but I am sure you could do it without problems. Lots of people slap in eagles/crowers without doing a thing. JEff" How much will all of that cost at the machine shop? and are the integra rods stonger than the a6's? |
Re:87-89 integra rods
yes they are stronger, how much stronger? I have no idea, they are just "beefier" in size, so they should support more HP.
How much would a machine shop charge? I dont know.. pick up a phone book and call around. Each machine shop has different prices. Jeff |
Re:87-89 integra rods
How much do you think i can get the integra rods for at a local wreckers?
|
Re:87-89 integra rods
you should probably go and call them to find out, because I have no idea..
40 bucks? |
Re:87-89 integra rods
hell i wish it was 40, lol, around here in the london ontario area, the wreckers guys are fucken jerks, i had to pay 160 bucks for my STD manifold from a D16Y7
|
Re:87-89 integra rods
So you actually shelled out and bought it for 160? ::)
eh... you probably could have bought one from Winnipeg for $20-$40 and had it shipped for like ten bucks... |
Re:87-89 integra rods
youre serious? it was with the cat converter on it, but man hook me up where do you get parts that cheep in winnepeg?
|
Re:87-89 integra rods
everywhere... LOL
|
All times are GMT -5. The time now is 04:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands