1990 honda civic frame bent.
 

I have a 90 civic hatch,so for the past few months the car has gone through a few sets
of tires in the front. >:( Today I went to get a new st and a wwheel alignment done
because I could see the FUCKEN wires on the outer edge of the tires. When I pay for
work that was done the guy tells me they couldnt do the wheel alignment because
frame is bent. :'( :'( :'( :'(

Right when Iam going to start doing ---- to the car to make it look cool I find this out. Ive
had the car for 3 years, that was three years of figuring wiring problems out, changing the
motor, clutch jobs, getting ---- at pick and pull and now this.

What should I do? Has eny one ever delt with a prob. like this?

Re: 1990 honda civic frame bent.
 

lol. was it in an accident ever?

i would make it into a mean street machine with no interior that you only take out at night
and then get a beater

Re: 1990 honda civic frame bent.
 

could be the sub frame in the front, they bend easy or could be the unibody, subframe you replace, unibody you can get pulled buy a body shop. Are both left and right out side edges worn on the tires?

Re: 1990 honda civic frame bent.
 

the right tire is worn on the outer edge and the left is on the outer edge.

Re: 1990 honda civic frame bent.
 

usally too much toe in does that, its hard to have a "bent frame" on a unibody were both sides are out. Did you get a print out so I can see the numbers?

Re: 1990 honda civic frame bent.
 

yes, i did get print out, but I dont know how to read it.

Re: 1990 honda civic frame bent.
 

post the numbers for me

left caster &camber
right caster & camber
total toe

give me front and back if posible

Re: 1990 honda civic frame bent.
 

give me a second here to look at it

Re: 1990 honda civic frame bent.
 

Left camber actual before specified range
-2.2 -2.2 -1.0 1.0
left caster 2.0 2.9 2.0 4.0



Right camber -0.1 -0.2 -1.0 1.0

Right caster -0.3 0.3 2.0 4.0

FrontTotal toe actual before specified range
0.11 2.08 -0.24 0.24

Rear total toe actual before specified range
0.20 0.38 0.08 0.32

Re: 1990 honda civic frame bent.
 

wow thats bad :-X The left camber is too much soo the top ball joint is in too far, and the right caster is way out, the lower ball joint is too far back. I would take that print out to a body shop and ask them what they think, its definitly been in an aceident.