**UPDATE**Who to have Sleeve ASAP
 

Hey All, i finally found a block to put my head and all my goodies in. Thing is, i have to send the block out to get sleeved now, going to be running cp's and manley's . Should i send it to Benson or Golden Eagle? Let me know what you think, i will be sending it off within the next couple days.

Well, here is the final word, getting shipped out in the next couple days. LMK if this looks like a good price to all of you for golden eagle HD sleeves.

$752 for the block sleeving
$100 for bore and hone
$60 o ring
$60 shipping back
Total shipped back $972

Re: Who to have Sleeve ASAP
 

carquest

no but seriously didn't you see the huge thread about this? look for it, there was a lot of good info

Re: Who to have Sleeve ASAP
 

i, as all the NW crew will tell you, have read too much earl propaganda on Honda-Tech and blow a load everytime i see a Benson Signature Series block (he puts his name on them now, seen one, touched it 8))...

but in all honesty they all can sleeve a motor... there have been blocks fucked up in the past, and everyone in the industry seems to have learned from those peoples mistakes...

http://www.honda-tech.com/zerothread?id=565375 <~propaganda im referring too...

Re: Who to have Sleeve ASAP
 

allrite fine, i didn't want to have to do it sense benson is the most expensive (950) but whatev.
Block is getting shipped out tuesday, hopefuly i can have him get it back to me asap sense il be on xmas leave dec.27 -jan 11 in vancouver,wa .
We could have a big install thing in my shop and get drunk as ---- if a few people wanted to get together

Re: Who to have Sleeve ASAP
 

I wouldnt recoment letting HMT get drunk and work on your high $$ setup :S :X But if so im down :y

Re: Who to have Sleeve ASAP
 

i dont give a ---- if people are drunk while working on my setup, il stay somewhat sober, il be the quality control dude or whatever. lol
hey who all got massive snow? on my drive up from battleground to oak harbor (whidbey island/burlington/mt vernon) it started snowing rite north of tacoma and by the time i got to oak harbor on the island tonight there was about 30 cars in ditches on highway 20 and 4 inches of snow at my house on the island. anyone else get alot?

Re: Who to have Sleeve ASAP
 

very true....but im down too...

Re: Who to have Sleeve ASAP
 

If you weren't on the west coast i'd be down :(

Re: Who to have Sleeve ASAP
 

il invite alot of hoes over for you dirty fucks to play with while im slaving on the car. ;D
this is going in a crx by the way.

Eagle rods
CP pistons
Sleeved
Garret t3/t04e .57 .60 .63
tial 38mm
greddy rs bov
still need a intercooler
RC 650's
and all electronics etc etc

Re: Who to have Sleeve ASAP
 

come on people, give me some opinions why.

Re: Who to have Sleeve ASAP
 

ill deff be their now :y

GE u can get a sleeved and o-ringed block for like $850 shipped back to you :6

Re: Who to have Sleeve ASAP
 

think RS has the same deal...

Re: Who to have Sleeve ASAP
 

that turbo's too small for a sleeved block, thats a stock block turbo.

Re: Who to have Sleeve ASAP
 

yeah a buddy had a similar turbo on his built B18C, maxed that little fucker out at like ~350whp...

Re: Who to have Sleeve ASAP
 

and thats stock block power...

Re: Who to have Sleeve ASAP
 

allrite jason, well then what do you have in mind? im pretty tapped out for cash after all this. keep in mind military paycheck=---- lol

Re: Who to have Sleeve ASAP
 

gt35r ...gt40r... something like that.

Re: Who to have Sleeve ASAP
 

gt40r :y

Re: Who to have Sleeve ASAP
 

you must have missed the tapped for cash part. those things are retarded expensive.
BTW i think im going GE HD sleeves.
SHOULD i get it O-ringed? WHat are the pro's and con's?

Re: Who to have Sleeve ASAP
 

Okay then go grab a turbo off a semi truck lol :)

Re: Who to have Sleeve ASAP
 

I'd atleast run one of the bigger SC61

Re: Who to have Sleeve ASAP
 

Im down for some hmt engine building. when do you plan to start building? not sure if i can travel all the way to vancouver during this crappy weather

Re: Who to have Sleeve ASAP
 

Local CRX ran 10's on that turbo 135mph they can make enouf power :6

Re: Who to have Sleeve ASAP
 

Got my H sleeved at GE... EARL tried to sell me on the cps... i wanted to use endyn.... he wantedto use acl bearings i wanted oem. isooooo.... instead of people trying to sell me what they could make the most on..... I went with GE HD sleeves... block is on the way back to me now.... Ill post pics. Benson does great work... But i know of at least 3 600+ whp daily cars...al;l running GE sleeves. Camp 1320 has a bomb deal too 831 sleeved decked and shipped back to you (100 extra for H series). just got to ship it there. My h block cost 32 bucks ups 3day from auburn... Hope it helps.

You should try to get a bigger snail... i agree, youl max the t3/4 out quick...prob a bit before 400. I think i may know someone who has a sc61 for sale... reasonably priced. ill check it out.

Re: Who to have Sleeve ASAP
 

There is only one turbo that meets your power goal and budget- Holset time :y

Re: Who to have Sleeve ASAP
 

GT42R....700+whp :6

Re: Who to have Sleeve ASAP
 

thats no a bad idea either

Re: Who to have Sleeve ASAP
 

Go back to HT >:(

Re: Who to have Sleeve ASAP
 

o-ring it

Re: Who to have Sleeve ASAP
 

they look awesome on a topmount too... maybe some Neptune engine management... and a the complete Full-Race catalog....... :P

Re: Who to have Sleeve ASAP
 

Camp1320 is who im going through, it was reasonably cheap considering. i think it was like 751 +100 for bore,hone,deck so it turned out to be 851. Still trying to figure out if i need to get it oringed. also, who has that sc61 for sale?

Re: Who to have Sleeve ASAP
 

What exactly does having it o-ringed do? Is it worth it? Im not looking for over 500hp.

Re: Who to have Sleeve ASAP
 

btw,the install/meet/whatever with lots of beer and food will be someitme inbetween dec 27th and jan 11th.

Re: Who to have Sleeve ASAP
 

turbos not for sale... sorry..its on a buddy's teg.

Re: Who to have Sleeve ASAP
 

dang, anyone got some holset's layin around?

Re: Who to have Sleeve ASAP
 

I made 393 whp on a .57 T04E @ 24 psi. Made 338 wtq at 6200 and then tq fell off like a rock while hp stayed flat as a strap in the 380+ range 6800-9500. Combo small compressor near-max and ignition system limitations. This was on a Mustang dyno, should be no problem cracking 500 whp on a Dynojet with that turbo, just plan on running race gas past 350-375 ish because small compressors heat air and stuff. The car this turbo is attached to has the power to weight to be a 9 second car, but lacks suspension work. The car this turbo is attached to has the power to weight to crack a real high nine, so don't listen to all the noise.

Your 650cc injectors are small and homosexual, however, they are stock block injectors. ------- drop some money on your fuel system and quit being a lame ass. :S

Re: Who to have Sleeve ASAP
 

They hooked me up... 911 sleeved and decked h tomy door with a shirt ( a big one) for$911.

Re: Who to have Sleeve ASAP
 

think i need 1000cc injectors? and also anyone know of anyone in the NW area getting rid of a larger turbo?

Re: Who to have Sleeve ASAP
 

HOLY ---- HATCHBOY NEEDS BIGGER INJECTORS!!!1 Don't forget the Full Rice -10 sump feed and line complete with A1000.

Re: Who to have Sleeve ASAP
 

jd dont be a fag. =D
you know im not very honda-techish like that. i don't post htere, i grew up on this site and have about lessthan half of what all the honda tech kids have into my kit.
is there nothing wrong with building a clean more spendy kit for once?

id, u know i love you, but stfu queer. =)