Re: $2009 Grassroots Motorsports Build
Mike is a good dude, i buy wholesale from him for other forums and local sales. i wouldnt be surprised if he would cut you a break for the GRM deal.
|
Re: $2009 Grassroots Motorsports Build
a good buddy of mine does powdercoating on the side (has a massive oven) Struck a deal tonight to do all the suspension on the car and subframe for basically the cost of the powder, my Fuel cell and a cae of beer.
So this weekend I am gonna build something to dolly the car around on with no suspension |
Re: $2009 Grassroots Motorsports Build
Originally Posted by Joseph Davis
Flat steel is prone to flexing along it's weak side. All modern unibody frames are set up to mimick a spaceframe as best as possible, using a rigid tube is in keeping with this.
Use the 90 degree angle at both ends of the tube, the only way 90 degree angles will plate the frame. It'll make sense when you get in there. http://www.jsracing-net.com/catalog/files/t_484.jpg |
Re: $2009 Grassroots Motorsports Build
Originally Posted by junkyard racer
I had these on my EG6 in Okinawa. The J's racing ones are made from thick flat steel (the ones I had) were somewhat heavy and were solid as ----.
http://www.jsracing-net.com/catalog/files/t_484.jpg Pretty much what I was gonna build. |
Re: $2009 Grassroots Motorsports Build
Looking good. I wish i could do this. I found a EF hatch DX, 240k,with 4 speed manual for $500. Wish i had $2009 to spend on a crazy project.
|
Re: $2009 Grassroots Motorsports Build
I just sold the Snows and steelies that came on the car for $250
so I am up $50. |
Re: $2009 Grassroots Motorsports Build
I will have pics tomorrow.... some updates
Started the wire tuck. I filled 40 holes today with the welder, have another 20 or so to go. That GPS I found in the car? Traded it today + $80 for a Carbon Fibre Hood (ballin) Pulled the dash for the wire tuck powerwashed the engine compartment Welded the engine mounts , they have 4 tacks ea. from the factory Went to the wreckers, found the identical car with a D15 Vtec swap and some other goodies. B&M shifter Crane sport compact ignition (2 step) MSD coil Various trim bits Free!! the guy accidentially sold the stock hood I asked them to hold on to..so he felt bad I will post up some pics tomorrow. Things are coming along nicely. My buddy traded a rusted POS S-10 for an automatic 90 EF sedan in good shape.. Gonna put a T25 on it , RRFPR and have some fun\ Pics to come |
Re: $2009 Grassroots Motorsports Build
Damn you have some luck finding these deals!!! Can't wait to see the final out come.
|
Re: $2009 Grassroots Motorsports Build
http://i31.photobucket.com/albums/c3...9/P2150053.jpg
Is this what you meant J.D? Welded the seams back there too http://i31.photobucket.com/albums/c3...9/P2150061.jpg http://i31.photobucket.com/albums/c3...9/P2150064.jpg http://i31.photobucket.com/albums/c3...9/P2150065.jpg http://i31.photobucket.com/albums/c3...9/P2150069.jpg http://i31.photobucket.com/albums/c3...9/P2150070.jpg http://i31.photobucket.com/albums/c3...9/P2150071.jpg Buddy of mine picked this up for nothing , Auto , not rotten , but dented up. Going to turbo it until she blows then throw in a D15b we have sitting around with an RB25 turbo http://i31.photobucket.com/albums/c3...9/P2140037.jpg |
Re: $2009 Grassroots Motorsports Build
thats awesome. i bet the auto tranny goes before the engine if you run reasonable boost
|
All times are GMT -5. The time now is 12:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands