HomemadeTurbo - DIY Turbo Forum
Share Your Pictures with Our Community. Upload Now
0 2019/11/11 14:31:52
0 2019/11/11 14:31:50
0 2019/11/11 14:31:48
0 2019/11/11 14:31:47
0 2019/11/11 14:31:28
1 2019/11/05 13:37:13
1989 T2 Garrett turbo.
1989 T2 Garrett turbo.
0 2019/11/05 13:35:25
1989 rear disc brakes, giving me the larger brakes all around.
1989 rear disc brakes, giving me the larger brakes all around.
0 2019/11/05 13:33:46
DOA 2.2L TBI engine with turbo solenoids and MAP sensor.
DOA 2.2L TBI engine with turbo solenoids and MAP sensor.
0 2019/11/05 13:32:14
Inside, 1989 female connection, and cowl brace (it bolted right in replacing the 1986 piece.
Inside, 1989 female connection, and cowl brace (it bolted right in replacing the 1986 piece.
0 2019/11/05 13:29:51
Under hood view of harness penetration.
Under hood view of harness penetration.
0 2019/11/05 13:29:36
Old rectangular bulkhead connector hole drilled with hole saw for 1989 through grommet.
Old rectangular bulkhead connector hole drilled with hole saw for 1989 through grommet.
0 2019/11/05 13:27:58
Advertisement
Trial fit of complete 1989 J body turbo coupe front harness into 1986 K body.
Trial fit of complete 1989 J body turbo coupe front harness into 1986 K body.
0 2019/11/05 13:26:35
Right side of dash.
Right side of dash.
0 2019/11/05 13:24:19
1989 J body dash in 1986 K car, left side.
1989 J body dash in 1986 K car, left side.
0 2019/11/05 13:24:02
Let there be light.
Let there be light.
0 2019/11/05 13:21:22
Starting condition, 32 years, sat for 12 years.
Starting condition, 32 years, sat for 12 years.
0 2019/11/05 13:19:39
Hood on ready for some blasting!
Hood on ready for some blasting!
0 2019/10/23 17:43:45
Hood off stopped to make a quick tune adjustment at the house and thought "Photo Op!"
Hood off stopped to make a quick tune adjustment at the house and thought "Photo Op!"
0 2019/10/23 17:43:17
New alt home. Had to build all the brackets.
New alt home. Had to build all the brackets.
0 2019/10/23 17:42:49
2 darn near 270 degree bents in a very close area.
2 darn near 270 degree bents in a very close area.
0 2019/10/23 17:42:25
Took about 25hrs to build the hotside.
Took about 25hrs to build the hotside.
0 2019/10/23 17:41:41
From the front.
From the front.
0 2019/10/23 17:40:40
This was the hard part. Fitting those 2 2" pipes around the steering, lower rad hose, center link, etc.
This was the hard part. Fitting those 2 2" pipes around the steering, lower rad hose, center link, etc.
0 2019/10/23 17:39:57
Necked the 4" outlet down to 3" to fit between the starter and the body.
Necked the 4" outlet down to 3" to fit between the starter and the body.
0 2019/10/23 17:39:33
A glamour shot of the header, fuel rail and 5psi actuator.
A glamour shot of the header, fuel rail and 5psi actuator.
0 2019/10/23 17:38:43
Lots of Moab red dirt went bye bye.
Lots of Moab red dirt went bye bye.
0 2019/10/23 17:38:19
Filthy bird plugged and ready for a bath.
Filthy bird plugged and ready for a bath.
0 2019/10/23 17:37:41
Filthy bird tore down.
Filthy bird tore down.
0 2019/10/23 17:37:05
Front disassembled to make room for the intercooler.
Front disassembled to make room for the intercooler.
0 2019/10/23 17:36:07
Extremely Dirty AMC 258 w/GM TBI
Extremely Dirty AMC 258 w/GM TBI
0 2019/10/23 17:16:37
Filthy AMC 258
Filthy AMC 258
0 2019/10/22 06:07:13
Advertisement