zc wont stay fired
hey i put my pos motor back togther and when i go to start it will will put for a sec but wont staying running but if i hold the key forward it will stay running until i let the key go ....im assuming this problaly has to do with something with my wiring or something i cant figure out what the ---- it might be
|
Re: zc wont stay fired
Originally Posted by cannizzo-racing1990
but if i hold the key forward it will stay running until i let the key go ....
wow we need a bit more of a description than that. |
Re: zc wont stay fired
yah i hold it forward so that the starter stays running and the car will run but a soon as i let it go in the ignition on position it shuts off
|
Re: zc wont stay fired
|
Re: zc wont stay fired
ok that helps thanks alot now i know whats wrong with the car
|
Re: zc wont stay fired
bad ignition switch at the bottom of the column.
88-91 I assume? |
Re: zc wont stay fired
thats what i was thinking too but i also was wondering if the switch was bad why it would work at all.... yah its a 1990
|
Re: zc wont stay fired
worn/dirty contacts.
A failure point like a main relay, getting to be quite common on the 88-91's |
Re: zc wont stay fired
i havent hooked up all my grounds yet could that play a big part of it not wanting to run?
|
Re: zc wont stay fired
the only one that really super matters is the one that grounds to the thermostat housing because that is the ground for ecu power
|
All times are GMT -5. The time now is 09:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands