WTF? New boost controller, wastegate is sticking open.
09-02-2006, 05:40 PM
#1
1.5 BAR
Thread Starter
Join Date: Apr 2006
Posts: 704
WTF? New boost controller, wastegate is sticking open.
So I hooked up a Turbosmart Dual Stage boost controller. First issue was that it boosts to 10psi all the way open, my wastegate spring is 5 psi.
Second issue is that after WOT to redline, the wastegate sticks open, and stays there till i drop RPMs and let it idle for about 10 seconds. After I do that, it's closed again and I can make boost.
Second issue is that after WOT to redline, the wastegate sticks open, and stays there till i drop RPMs and let it idle for about 10 seconds. After I do that, it's closed again and I can make boost.
09-02-2006, 09:36 PM
#3
1.5 BAR
Thread Starter
Join Date: Apr 2006
Posts: 704
Re: WTF? New boost controller, wastegate is sticking open.
I had it setup according to the diagram. I turned it sideways just now, and it is now boosting to wastegate setting, and not sticking. I'll be playing with it some more tonight after work.
Thread
Thread Starter
Forum
Replies
Last Post
