wondering what turbo this is??
I was wondering if any of you guys knew what turbo is on a 88 chrysler 2.2. I am pretty sure it is a mitsu turbo but what size, a/r trim, ect???
thanks BTW this is my first post, I am new here ;D |
Re:wondering what turbo this is??
It's probably a TE05H.
Edit for error: I meant TE04H |
Re:wondering what turbo this is??
he means teo4h and they are very small.
|
Re:wondering what turbo this is??
Yeah, my bad, thats what I meant, first post of the day, still kinda groggy.
|
Re:wondering what turbo this is??
hhaha.. Well just giving ya a hard time..
|
Re:wondering what turbo this is??
thanks guys ;)
I am currently piecing a turbo kit together for my car and my friend had this turbo, but I dont think it will do the job.... I think I might go for a 14b... or maybe a 16g I have a 00 civic SiR or "Si" in the states... so obviously I have a B16a2 and so far this is my parts list. manifold- I have this! has a mitsu TD05 flange turbo- 14b? 16g which would be good??? dsm side mount made into air to water (i am a welder so making stuff like this isnt hard... dsm 450cc injectors and resistor box v-afc hack thats all fo the major stuff I think I need but please add to my list if I need more essential things |
Re:wondering what turbo this is??
Boost gauge and very minimum a/f gauge. If you want to do it right, WB o2 and EGT.
Also, with the vafc, you get no timing retard so you'll probably want an MSD BTM as well. |
Re:wondering what turbo this is??
Ok, I will add the btm to the list!
I will definatley have a boost gauge and egt, and wanna go for a a/f but somthing with analog readout like the greddy... I would like to have the wideband but they are big coin! I guess it is a worth while investment tho... How much boost would you guys recommend to start off with and what is a general safe zone??? I was thinking of starting low at 6psi and eventually running 8 or 9 lbs... Also, are the dsm 450's too rich for a 14b setup??? should I go to 310's or somthing instead? thanks for the info guys, I try to read the board 2 times a day, This place is so informative! |
Re:wondering what turbo this is??
Is this the turbo you are referring to?
If it is then I believe its a 42/48 ar & compressor yes its small lol http://groups.msn.com/_Secure/0RgAKA...27260424040877 |
Re:wondering what turbo this is??
I am not sure if that is the turbo.... my friend just said that he had a car with a chrysler turbo 2.2 engine and I was thinking that it was a 88 as far as I can remember... now that I got a hold of this site http://www.thedodgegarage.com/turbo_turbo.html I am hoping that it is a 87 cause they come with T3's with a .42a/r on the cold side and a 48a/r on the hot side which I am thinking would be much better than the mitsubishi... would the garrett be sufficient for my car running 7-8 psi??
hehe, ya they were comparing the mitsu to the T3 and apparently the exh housing is like double the size and the shaft bearings are 1/3 of the size of the T3 |
All times are GMT -5. The time now is 03:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands