Will this work?
im building my set up, (b18a with a .48/.60) to be tuned with TE
and I want to do a dual stage boost control setup, basically so I can flip a switch and go from a low to a high setting...but my question is tuning wise will this work to have two separate boost settings ? im thinking it wont work on turbo edit,,, but my knowledge has come to and end on this one....help me out |
Re: Will this work?
i know when u can tune it and at the flick of a switch u can run the high boost tune and when that kicks in a fuel pump in the sec gas tank in the trunk will come on.<<<<<105 octane race gas.
then when u shut off the switch it will go back to low boost setting and the main fuel pump will kick back on.but i hear thats cost mad money to set up and tune RIGHT. |
Re: Will this work?
So basically you have no idea what you are talking about? um ok then.... :l
|
Re: Will this work?
Originally Posted by CSaddict
So basically you have no idea what you are talking about? um ok then.... :l
basically when you tune a car you're tuning the entire boost/rpm range, so you tune it all and there's no change in maps when you run a dual stage. |
Re: Will this work?
thats the conclusion I had about come to on my own....thanks guys
and this guy just made me feel smart
Originally Posted by zccr-xsi
i know when u can tune it and at the flick of a switch u can run the high boost tune and when that kicks in a fuel pump in the sec gas tank in the trunk will come on.<<<<<105 octane race gas.
then when u shut off the switch it will go back to low boost setting and the main fuel pump will kick back on.but i hear thats cost mad money to set up and tune RIGHT. |
Re: Will this work?
Originally Posted by Ogubudiah
thats the conclusion I had about come to on my own....thanks guys
and this guy just made me feel smart |
Re: Will this work?
MAP sensors are cool like that 8)
|
All times are GMT -5. The time now is 12:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands