will my setup destroy my car
01-09-2003, 08:43 PM
#1
1.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 305
will my setup destroy my car
i have a 99' civic si , and i got some greas saab T3 turbo and i have no idea what the PSI is set too, i beleive it came off of a 9000, can some one please tell me what PSI its set to also, the only fuel managment im going to have is some black FMU that came off of a ford, will this be a sufficient setup for my turbo project, or do i need to stop being gay and my a kit
01-09-2003, 08:46 PM
#2
Guest
Posts: n/a
Re:will my setup destroy my car
Well, from what I have read about everyone else's setups, they have a bit more information. Plus, the wastegate is what actually "sets" the amount of boost that the turbo will push to the intake before releaseing.
Anyway, "some Ford FMU"? Hrm.. you'd need to be more specific.
Anyway, "some Ford FMU"? Hrm.. you'd need to be more specific.
01-09-2003, 09:13 PM
#5
1.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 305
Re:will my setup destroy my car
let me be a little more specific about my set up, i have a saab 900 or 9000 T3 turbo, i also have the saab intercooler ,the only thing i have to control my fuel is an FMU, i dont nkow the ration its set at, but the person i got it from said it was off of a ford, i am wondering if anyone knows what the wasegate is set to and if my engine can handle it with just the FMU
