im rite now using a ihirhb5 ford probe turbo boosting 8psi not looking to make alot of power and was wondering for fuel management system if i can use the jdm h22a 345cc injectors, walbro 255lph fuel pump, vortech fmu would that be enough for my f22a1 turbo ?thanks in advance

 

fmu = kaboooooooooooooom

 

not using any electronic device to alter your map signal and running bigger injectors = putter, smoke, smoke, die

 

so what should i use for a low budget turbo kit im making rite now? i am using a ihirhb5 turbo and a dsm manifold what is recommended i know peeps saying the turbo is too small but i just want alittle bit of power thats all so please let me know what you guys think thanks in advance

 

bump

 

uber or crome *****

 

uber with a p06 go search the junkyards and hope or buy one off of somebody here, get dsm 450's,I thought the h22 injectors were 240cc, sell the turbo on ebay its way to small I have a t25 on my f and can't keep it out of boost,your turbo will be maxed out by 3000 rpm with that little guy and will become inefficent after that. I'm all for the ghettoness and being cheap but be cheap the right way and listen to people who have done this before.

 

seriously, sell the ihi and buy a bigger turbo from someone in the classifieds, there are plenty of 14b's thats a good turbo for the f22. and yes skinnye, the h22 injectors r 345cc, not 240cc.

go to a junkyard, get a p06 ecu, then buy the chipping ---- u need, and chip it with uberdata, or ull blow up with that fmu. u dont even have to do work on the ecu besides chipping in, cuz there are more than a few f22 maps out there. go to cb7tuner.com and look for the f22 maps on there.

 

I wouldnt push the 345cc lude injectors past 250whp, but for your everyday turbokit and stock engine they will probably work just fine.

 

he'll still want to tune it I blew mine up on a basemap but new one is almost in if I ever would actually work on it.