will jdm h22a injectors and vortech fmu, and walbro fuel pump suffice f22 8psi?
 

im rite now using a ihirhb5 ford probe turbo boosting 8psi not looking to make alot of power and was wondering for fuel management system if i can use the jdm h22a 345cc injectors, walbro 255lph fuel pump, vortech fmu would that be enough for my f22a1 turbo ?thanks in advance

Re: will jdm h22a injectors and vortech fmu, and walbro fuel pump suffice f22 8psi?
 

fmu = kaboooooooooooooom

Re: will jdm h22a injectors and vortech fmu, and walbro fuel pump suffice f22 8p
 

not using any electronic device to alter your map signal and running bigger injectors = putter, smoke, smoke, die

Re: will jdm h22a injectors and vortech fmu, and walbro fuel pump suffice f22 8p
 

so what should i use for a low budget turbo kit im making rite now? i am using a ihirhb5 turbo and a dsm manifold what is recommended i know peeps saying the turbo is too small but i just want alittle bit of power thats all so please let me know what you guys think thanks in advance

Re: will jdm h22a injectors and vortech fmu, and walbro fuel pump suffice f22 8psi?
 

bump ???

Re: will jdm h22a injectors and vortech fmu, and walbro fuel pump suffice f22 8psi?
 

uber or crome nigga

Re: will jdm h22a injectors and vortech fmu, and walbro fuel pump suffice f22 8psi?
 

uber with a p06 go search the junkyards and hope or buy one off of somebody here, get dsm 450's,I thought the h22 injectors were 240cc, sell the turbo on ebay its way to small I have a t25 on my f and can't keep it out of boost,your turbo will be maxed out by 3000 rpm with that little guy and will become inefficent after that. I'm all for the ghettoness and being cheap but be cheap the right way and listen to people who have done this before.

Re: will jdm h22a injectors and vortech fmu, and walbro fuel pump suffice f22 8psi?
 

seriously, sell the ihi and buy a bigger turbo from someone in the classifieds, there are plenty of 14b's thats a good turbo for the f22. and yes skinnye, the h22 injectors r 345cc, not 240cc.

go to a junkyard, get a p06 ecu, then buy the chipping ---- u need, and chip it with uberdata, or ull blow up with that fmu. u dont even have to do work on the ecu besides chipping in, cuz there are more than a few f22 maps out there. go to cb7tuner.com and look for the f22 maps on there.

Re: will jdm h22a injectors and vortech fmu, and walbro fuel pump suffice f22 8psi?
 

I wouldnt push the 345cc lude injectors past 250whp, but for your everyday turbokit and stock engine they will probably work just fine.

Re: will jdm h22a injectors and vortech fmu, and walbro fuel pump suffice f22 8psi?
 

he'll still want to tune it I blew mine up on a basemap :'( but new one is almost in if I ever would actually work on it.

Re: will jdm h22a injectors and vortech fmu, and walbro fuel pump suffice f22 8psi?
 

no need for fuel pump u can use the probe turbo get the 450 dsm injectors and a p06 ecu pm and i will send you a base map, DO NOT USE FMU it a paper weigh waiting to happen, if you can find some one to tune for you run chrome its way better then uber, don't run more then 8psi with out a good tune or you will be buying a new engine

Re: will jdm h22a injectors and vortech fmu, and walbro fuel pump suffice f22 8psi?
 

so the ford probe turbo will work fine on my f22a1 at least alittlebit of power rite? and can you pm me on what kind of ecus or base map you can get for me thanks

Re: will jdm h22a injectors and vortech fmu, and walbro fuel pump suffice f22 8p
 

that ---- is hillarious!!!!!!!!!!!!1!!!! ;D