Smith-02

you have a 3.6psi spring.

ifly87

I would think the same thing but the WG isnt opening.

one2many

did you try to take the vac signal off the WG after you fixed the leaks ?

LilWayne

one adjustable cam gear? whats up with that?

Smith-02

this is external gate? is it bolted down to the manifold?

RotaryGeek

well as a last ditch effort change the cam timing back to stock and see if that changes anything. try gutting the cat. i have always heard your exhaust will only flow as much as the smallest part in it, so if its a clogged cat it could very well be the problem.

ifly87

I put the exh. cam gear back to stock, reset the ign. timing and pulled the line off the WG, still only about 3~4psi. I wont see the car for about a week now but I'm gonna whack the cat off and just weld in a straight pipe. thanks for all the replies, and help.

E-b0la

i was waiting for someone to say that.

Just leave it open downpipe and drive it.

Dr3w

dont know if anyone mentioned it .. but make sure your wastegate flapper is perfectly sealing.

ifly87

I could jam my dick in the dumptube without getting burnt if I wanted. The WG is not the problem.