sikcrx89

UPDATE!!!

well i didnt work today because it poured raintill 12pm so i tried the other basemap that i burned last night. well it died on me once and tried to a second time but i was able to keep it from dying and it drove fine so what does that tell you? any and all info still appreciated.

SmellySOHC

are you using the right map for your motor?? i had similiar issues driving on a wrong map lol

sikcrx89

well the map i just burnt was for a z6 and is pig rich at idle but it only died on me once where the other 2 maps i had for zc's die every time i hit any boost

sikcrx89

i still need some help figuring this out!!!! ^^^^^^

ifly87

You say your getting no cel at all? are you sure you put that jumper in? I wouldnt have put a new map sensor in until you had the problems you already have figured out but w/e. Try starting over and making your own basemep from scratch so you know that it isnt the problem.

sikcrx89

well i just sold my burner and i dont know the TE software well enough to make my own basemap. im going to buy a burn1 probably this weekend from chris so maybe when i get i wiil see what i can do as far as making my own but do you have any idea what could be causing this?

Slo_crx1

Burner works great btw...blasted a bin off BRE earlier last night and works flawlessly. Think it might have something to do with the code? NG48/55 as compared to say NG60?

sikcrx89

well the one map i have is the ng48 and the one i have now is ng60 and the other i tried im not sure which one it was but all produced the same outcome die after any boost. the map i have now seems to be a little better it only died once and i saved it from duing the second time which i have not been able to do with my other maps.

Slo_crx1

Is it happening only when you come to stop after boosting? Or does it hiccup into boost? Could be too rich in boost and starting to foul the plugs, might also be too rich at idle. Might also have both compounding themselves together...so many variables

sikcrx89

exactly it dies after i have hit boost come to a stop and then try to take off from the stop is when it dies. so you think fouling plugs? i have the ngk-bkre7-11 gapped to .28 i thought origianally the gap was too big and that was my problem(they were stock gap) so i closed them up to .28 should i maybe run .29-.30 or is what i have suffeciant enough?