Forced Induction Custom FI Setup Questions

Where should i run my wastegate dump pipe?

Thread Tools
 
Search this Thread
 
Old 09-30-2003, 03:14 PM
  #1  
0.0 BAR
Thread Starter
 
KnowForever's Avatar
 
Join Date: Jul 2003
Posts: 11
Default Where should i run my wastegate dump pipe?

Topic pretty much says it all. I'm thinkig about running a pipe straight down from the wastegate into the top of the downpipe. Would that cause any problems/ unwanted side affects that i should know about?
KnowForever is offline  
Old 09-30-2003, 03:29 PM
  #2  
3.0 BAR
 
88crxSi's Avatar
 
Join Date: Feb 2003
Posts: 9,089
Default Re:Where should i run my wastegate dump pipe?

need to keep good exhaust flow. A good rule of thumb has been to run a second Downpipe for 18 inches and then merge back to the normal exhaust right b4 the cat.
88crxSi is offline  
Old 09-30-2003, 03:34 PM
  #3  
0.0 BAR
Thread Starter
 
KnowForever's Avatar
 
Join Date: Jul 2003
Posts: 11
Default Re:Where should i run my wastegate dump pipe?

sounds like a good idea to me..i wonder who could make that pipe for me?
KnowForever is offline  
Old 09-30-2003, 03:41 PM
  #4  
3.0 BAR
 
88crxSi's Avatar
 
Join Date: Feb 2003
Posts: 9,089
Default Re:Where should i run my wastegate dump pipe?

if u have the o2 houseing and WG housing any exhaust shop should be able to do that in >1hr.
88crxSi is offline  
Old 09-30-2003, 09:44 PM
  #5  
0.0 BAR
 
Reddy's Avatar
 
Join Date: Jun 2003
Posts: 0
Default Re:Where should i run my wastegate dump pipe?

You'll loose horesepower if you pipe the dump tube into the exhaust. I'd keep it vented to the atmosphere and run it out to the fender.
Reddy is offline  
Old 09-30-2003, 10:19 PM
  #6  
1.0 BAR
 
d16tuner's Avatar
 
Join Date: Sep 2003
Posts: 453
Default Re:Where should i run my wastegate dump pipe?

not very environmentally freindly
d16tuner is offline  
Old 10-01-2003, 03:19 AM
  #7  
0.5 BAR
 
Sniperpain's Avatar
 
Join Date: May 2003
Posts: 98
Default Re:Where should i run my wastegate dump pipe?

Posted by: Whitey Posted on: September 30, 2003, 0748 pm
You'll loose horesepower if you pipe the dump tube into the exhaust. I'd keep it vented to the atmosphere and run it out to the fender.


is this for certain? or just in your opinion, cuz i dont see why it should loose hp, its not restricting any air flow.
Sniperpain is offline  
Old 10-01-2003, 11:46 AM
  #8  
3.0 BAR
 
88crxSi's Avatar
 
Join Date: Feb 2003
Posts: 9,089
Default Re:Where should i run my wastegate dump pipe?

as long as u have a 2.5" or larger cat back exhaust and the downpipe tube flows smoothly into the main exhaust it will be fine.
88crxSi is offline  
Old 10-01-2003, 07:43 PM
  #9  
0.0 BAR
 
Reddy's Avatar
 
Join Date: Jun 2003
Posts: 0
Default Re:Where should i run my wastegate dump pipe?

Its not my opinion it is certain by experience. unless you have 3 inch or bigger exhaust it won't be that dramatic. And if you have a cat too than its a definite power loss. Even the one company (I think f-Max) had their kit dynoed with an atmospheric and without and it was like a 30hp difference.
Reddy is offline  
Old 10-01-2003, 09:00 PM
  #10  
3.0 BAR
 
d16forlife's Avatar
 
Join Date: Jun 2003
Posts: 6,857
Default Re:Where should i run my wastegate dump pipe?

Its not my opinion it is certain by experience. unless you have 3 inch or bigger exhaust it won't be that dramatic. And if you have a cat too than its a definite power loss. Even the one company (I think f-Max) had their kit dynoed with an atmospheric and without and it was like a 30hp difference.
So you mean that an external wastegate set up with atmospheric dump will make more power than an internal wastegated turbo?
That sounds theoretically correct since you would have less exhaust gas volume allowing the gasses passing through the exhaust to exit quicker thus spooling quicker(---- does that make sense?).
d16forlife is offline  


Quick Reply: Where should i run my wastegate dump pipe?



All times are GMT -5. The time now is 10:22 AM.