where can i find the o-ring in the dsm 450's install tech
 

i tried searching
https://www.homemadeturbo.com/tech_p...zed-seal_P.jpg
https://www.homemadeturbo.com/tech_p...seal-kit_P.jpg
this one, where can i find it?
does it come in that napa box?

Re: where can i find the o-ring in the dsm 450's install tech
 

just like it says in the box. seal kit from NAPA.
https://www.homemadeturbo.com/tech_p...seal-kit_P.jpg

Re: where can i find the o-ring in the dsm 450's install tech
 

OEM Honda o-ring works just fine

Re: where can i find the o-ring in the dsm 450's install tech
 

pull out old injectors, lube up seals, stuff it together and suck it down with the fuel rail, its tight I'm sure the injectors hate it but works everytime :1

Re: where can i find the o-ring in the dsm 450's install tech
 

50% of the time, it works all the time 8)

Re: where can i find the o-ring in the dsm 450's install tech
 

so i can just use my stock o-rings?

Re: where can i find the o-ring in the dsm 450's install tech
 

yup

push them in as far as you can(they wont go far)
put the fuel rail on and tighten down slowly and evenly, the injectors will pop in.

Re: where can i find the o-ring in the dsm 450's install tech
 

I took my stock O-rings and sanded them after putting them on the fuel injector to make the fit not so tight. the key is to sand a little, then test fit till they're perfect.

Re: where can i find the o-ring in the dsm 450's install tech
 

cool thanks guys.

Re: where can i find the o-ring in the dsm 450's install tech
 

i got mine on the stock o rings and they seems fine. but i think they hate me.