where can i find the o-ring in the dsm 450's install tech
02-14-2008, 02:06 AM
#1
0.0 BAR
Thread Starter
Join Date: Jan 2008
Posts: 0
where can i find the o-ring in the dsm 450's install tech
i tried searching
https://www.homemadeturbo.com/tech_p...seal-kit_P.jpg
this one, where can i find it?
does it come in that napa box?
https://www.homemadeturbo.com/tech_p...seal-kit_P.jpg
this one, where can i find it?
does it come in that napa box?
02-14-2008, 03:57 PM
#7
3.0 BAR
Join Date: Dec 2004
Posts: 1,976
Re: where can i find the o-ring in the dsm 450's install tech
Originally Posted by N/A mike
so i can just use my stock o-rings?
push them in as far as you can(they wont go far)
put the fuel rail on and tighten down slowly and evenly, the injectors will pop in.
02-15-2008, 02:16 AM
#8
3.0 BAR
Join Date: May 2006
Posts: 1,967
Re: where can i find the o-ring in the dsm 450's install tech
I took my stock O-rings and sanded them after putting them on the fuel injector to make the fit not so tight. the key is to sand a little, then test fit till they're perfect.
